Replies – Forums – Dave Jenkins – Page 8

Forum Replies Created

Page 8 of 57

← 1 … 7 8 9 … 57 →

Dave Jenkins
March 8, 2014 at 4:35 am in reply to: optimal way to plug in Tbolt peripherals into new MacPro?

After lots of testing I ended up putting both my monitors on one bus. However the lower of the two bus connectors is primary. So I put my main monitor on the lower connector and my second monitor above it on the same bus. I have my Pegasus raid on it’s own bus and the AJA XT thunderbolt on it own bus. I tried both the BM Mini Monitor & the AJA T-Tap and couldn’t get audio to sync unless they both were set to use the same output. In my case that was HDMI. Once I started using the AJA IO XT thunderbolt all the sync problems cleared up!

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
March 1, 2014 at 3:37 pm in reply to: Audio doesn’t Sync right

make sure the audio rates are the same. 44.1 or 48k FCP X won’t sync mixed audio rates.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 26, 2014 at 4:42 am in reply to: Sluggish and halting

I look forward to hearing your experiences when you get your new Mac Pro. It’s like being on an island right now with very little input on these new cans.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 25, 2014 at 5:13 am in reply to: Sluggish and halting

I’m having some playback issues on the new MacPro trash can. Short spinning beach balls when you hit the space bar from 10 to 30 second pauses. This is with a TB2 Pegasus R6 raid.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 15, 2014 at 3:52 pm in reply to: Would the Promise Pegasus R6 12TB be a good investment?

I have been using the R6 since January with the new mac pro and it’s been perfect! I’m very happy with it. Speeds are 800 MB’s read & write.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 15, 2014 at 4:03 am in reply to: FCPX 10.1 and BM 4k Extreme

I have the BM Mini Monitor and am having major playback problems on the new Mac Pro with a Pegasus T2 Raid. This may not help you but I thought I’d chime in.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 14, 2014 at 1:12 pm in reply to: What am I doing wrong (round trip Adobe PP)

We had the same problem. Ended up having Resolve cut the master file with scene detection.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 14, 2014 at 12:15 pm in reply to: How to blur or censor multiple faces or images

Slice X by Core Melt has a great tracker that will do all the key framing for you.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
February 10, 2014 at 6:32 am in reply to: Copy/Paste from Primary to Secondary – Possible?

Edit: Paste as connected clip.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X
Dave Jenkins
January 24, 2014 at 4:27 pm in reply to: Modified File issue

Bret
FWIW it seems that 10.1 could care less if you modify a file. I’ve been rerendering over the same file with AE and it just magically relinks. If the new file is longer, I can drag it out longer. Wonderful. Normal.

Same here, just finished a grading in DaVinci Resolve and when I go back to Resolve and regrade a shot it relinks in 10.1.1 no problem.

Dajen Productions, Santa Barbara, CA
Mac Pro 3.5MHz 6-Core Late 2013
FCP X

Page 8 of 57

← 1 … 7 8 9 … 57 →