[Chris Wright]

color space 8,16,32, (32) in File, Project settings,color settings depth and working space HDTV 609.

[Chris Wright]

Add a new camera, and add the following expression to the position property of the camera: [Math.sin(time)*z,y,Math.cos(time)*z]

where z is the zoom value of the camera, and y is y position of the targeted layers, in our case the expression goes like this:

[Math.sin(time)*507,120,Math.cos(time)*507]

You’ll notice that the camera is now moving in a circle around

from
https://library.creativecow.net/articles/al_khatib_talid/volume_meter.php

[Chris Wright]

Green screened and opacity keyframed with a certain matte blend mode like screen.

[Chris Wright]

Maybe your original pictures are too small for high resolution output.

[Chris Wright]

If you mirror, orientate, and parent the 3 parallel sides of the box to one side, they will follow each other precisely, automatically. rotation, size, etc. Then you just only have to animate one layer and the rest follow by relative motion.

After Effects wins again!

[Chris Wright]

1. Tracker can be set in tracker options to set copy keyframes to a thing called a Target. or manually…

2. parenting

3. copy and paste keyframes in transform. You’ll want to do full motion tracking, movement, size, rotations. Make trackers sandwiched between what you want to track.

[Chris Wright]

https://www.blu-ray.com/faq/
–
Data transfer rate (data) 36.0Mbps (1x)
Data transfer rate (video/audio) 54.0Mbps (1.5x)
Video resolution (max) 1920×1080 (1080p)
Video bit rate (max) 40.0Mbps

Something’s wonked out because, offically, 50000 bitrate won’t even play in modern blue ray 1.5x unless you leave out sound, at least for now..future 8x firmware is coming. Time to throw out my old blue ray.

I know of no software encoders that can go above 40,000. What would be the point of non-working disks? They might be looking to re-encode your video, so 50 is a buffer zone against generation loss.

My take is recommend them getting an uncompressed monster or slightly compressed rgb. Any other work-arounds are welcome.

According to the Blu-ray Disc specification, 1x speed is defined as 36Mbps. However, as BD-ROM movies will require a 54Mbps data transfer rate the minimum speed we’re expecting to see is 2x (72Mbps). Blu-ray also has the potential for much higher speeds, as a result of the larger numerical aperture (NA) adopted by Blu-ray Disc. The large NA value effectively means that Blu-ray will require less recording power and lower disc rotation speed than DVD and HD-DVD to achieve the same data transfer rate. While the media itself limited the recording speed in the past, the only limiting factor for Blu-ray is the capacity of the hardware. If we assume a maximum disc rotation speed of 10,000 RPM, then 12x at the outer diameter should be possible (about 400Mbps). This is why the Blu-ray Disc Association (BDA) already has plans to raise the speed to 8x (288Mbps) or more in the future.

[Chris Wright]

one easy way is to just precompose a layer with its isolated effects and port it over to a new comp.

[Chris Wright]

You could try the difference matte and isolate actors by luma or rgb so that rotoscoping is not required. It has worked great for me. I can set the actor to be the only thing not blurred automatically.

[Chris Wright]

either you don’t have qt 7.4 pro or you have a corrupted registry. Remove qt excess from registry and re-install fresh copy