Replies – Forums – Caton Clark

Forum Replies Created

Page 1 of 3

1 2 3 →

Caton Clark
November 1, 2011 at 9:36 pm in reply to: Making 29.97 EX3 footage look like 23.98 EX3 Footage

Interlaced
Caton Clark
August 26, 2010 at 10:26 pm in reply to: Make a still image wink

I used a combination of these to make it work. I placed two copies of the image on top of each other, and animated them as one (i needed to move around the image). When the animation came to a stop I inserted a circle matte over the eye on the top image, then I sandwiched a bezier mattes of both the upper and lower lid in between the two images and brought them together for two frames and then removed them.

It’s a little hacky but it got a laugh and a “nice wink” response. Victory.

Thanks for all the help.
Caton Clark
February 26, 2009 at 7:06 pm in reply to: Tape Rewind Visual Effect

I was able to find an equivalent TV Damage effect in Boris!

thanks for the tip!
Caton Clark
February 26, 2009 at 7:05 pm in reply to: What’s the highest/most appropriate resolution?

Thanks for your input, Rory. That’s really helpful.

I also found out that they ultimately want to output back onto DVCPRO HD tapes to finish, so I’m planning to use all the info I’ve been given on here plus the fact that they are going back to the original format they started with to overwhelm them into agreeing with me.

I hope it works . . .
Caton Clark
February 24, 2009 at 5:25 pm in reply to: What’s the highest/most appropriate resolution?

If they shot in DVCPRO is it worth it at all to up-res to 220 or will 145 be the best?

I’m not really sure why they didn’t go with DVCPRO when they loaded, but they went with 145, so here i am.
Caton Clark
February 24, 2009 at 4:10 pm in reply to: Tape Rewind Visual Effect

no, they have BCC 3 here.
Caton Clark
February 23, 2009 at 6:51 pm in reply to: Tape Rewind Visual Effect

If don’t have access to the tape right now or the deck, are there any other tricks?
Caton Clark
January 22, 2009 at 4:05 pm in reply to: HD Media FCP to External Monitor

You can try using your Kona mangement software to change the Kona video output to 720p. It may still be trying to output whatever format you were using prior to changing FCP to 720p.
Caton Clark
July 22, 2008 at 8:32 pm in reply to: BCC Glint – How to move without background

Hi Peter,

Sorry I didn’t let you know what platform I was on.

Any chance you’d know how to accomplish this in avid?

I tried applying the BCC effect to a paint effect but it still kept affecting the image beneath.

Thanks
Caton Clark
December 20, 2007 at 6:30 pm in reply to: Internal Media Hard drive vs. External

Someone told me that having two internal drives can be risky. If one of the drives gets corrupt or damaged, it will cause the second drive to go corrupt as well.

Any truth to this?

Page 1 of 3

1 2 3 →