[Arwa Merchant]

I’m wondering if you found a solution to this issue. I have done the same thing and cant imprt my files into FCP anymore. What now?

[Arwa Merchant]

We used the Sony HVR Z1E to shoot and used the Sony HVR M10E deck to digitize.

[Arwa Merchant]

I upgraded my drivers and that fixed the greyed out tab, so now it just says “All otputs active”.

-Arwa

[Arwa Merchant]

Thanks Luke,

I’ll test puttting down bars and tone and seeing what i get. My source is HDV 1080i. I should also mention, I rendered out a smalll portion as a 10 bit uncompressed file, and plopped that into a 10 bit uncompressed sequence and I had the same results, i.e, no video, just audio.

Will let you know in a day. Thanks for your help.

-Arwa

[Arwa Merchant]

Hello Luke I’ve been following your thread with Chris Davies from the UK and has been really quite helpful. Thank You.
Well, I’m trying to output my native HDV sequence to digibeta, which is at present in a Black Magic HDTV 1080i50 – HDV easy setup sequence.
I have a Decklink Plus card and unfortunately, I cant get a video output. I’m getting audio through my SDI cable, but no video. I made sure that video playback is set to BlackMagic HDTV 25Hz – 10bit (1920×1080).
I’m set to all frames in FCP. In the Decklink prefpane “all outputs are active”. And i can’t think of why this would not output. My Digibeta deck is also set corrctly to accept SDI.
Oh yes, here’s something interesting, when I hit play on the timeline and record on my deck, it’ll record the audio, but when I print to video, I dont get audio nor video recorded.

Please do let me know, if you or anyone else can think of why I can’t get an output. Thank You.

[Arwa Merchant]

Hello all
I have been reading and following all the threads related to HDV worflow. I am in Dubai, United Arab Emirates. I am working on an hour long documentray shot completely on HDV using the Sony camera. I have about 22 hours of footage, which I will be looking at tomorrow.
I wanted some suggestions on my workflow. I am working with FCP 5, a G5 dual processor, 2GB, no capture card, but can get one if needed.
I have been deciding to edit native HDV, capture all the footage via firewire onto 500GB FW800 drives. But it seems like almost everyone prefers converting the HDV footage to an i-frame format. but what’s the point of having the native codec, if you are going to convert everything.
Secondly, considering the amount of footage I have, i can’t convert it to a 10-bit uncompressed format. It would take way too much time.
My next option is to downconvert my HDV footage during capture to DV-PAL. Am I going to lose a lot of picture quality? What are the cons if I stay native?
My master has to be a digibeta PAL.
Please advise me on my workflow. I don’t have a capture card, but I can get one if it is essential to my edit and the final output.
Thank You.

[Arwa Merchant]

Hello all
I have been reading and following all the threads related to HDV worflow. I am in Dubai, United Arab Emirates. I am working on an hour long documentray shot completely on HDV using the Sony camera. I have about 22 hours of footage, which I will be looking at tomorrow.
I wanted some suggestions on my workflow. I am working with FCP 5, a G5 dual processor, 2GB, no capture card, but can get one if needed.
I have been deciding to edit native HDV, capture all the footage via firewire onto 500GB FW800 drives. But it seems like almost everyone prefers converting the HDV footage to an i-frame format. but what’s the point of having the native codec, if you are going to convert everything.
Secondly, considering the amount of footage I have, i can’t convert it to a 10-bit uncompressed format. It would take way too much time.
My next option is to downconvert my HDV footage during capture to DV-PAL. Am I going to lose a lot of picture quality? What are the cons if I stay native?
My master has to be a digibeta PAL.
Please advise me on my workflow. I don’t have a capture card, but I can get one if it is essential to my edit and the final output.
Thank You.

[Arwa Merchant]

Hello all
I have been reading and following all the threads related to HDV worflow. I am in Dubai, United Arab Emirates. I am working on an hour long documentray shot completely on HDV using the Sony camera. I have about 22 hours of footage, which I will be looking at tomorrow.
I wanted some suggestions on my workflow. I am working with FCP 5, a G5 dual processor, 2GB, no capture card, but can get one if needed.
I have been deciding to edit native HDV, capture all the footage via firewire onto 500GB FW800 drives. But it seems like almost everyone prefers converting the HDV footage to an i-frame format. but what’s the point of having the native codec, if you are going to convert everything.
Secondly, considering the amount of footage I have, i can’t convert it to a 10-bit uncompressed format. It would take way too much time.
My next option is to downconvert my HDV footage during capture to DV-PAL. Am I going to lose a lot of picture quality? What are the cons if I stay native?
My master has to be a digibeta PAL.
Please advise me on my workflow. I don’t have a capture card, but I can get one if it is essential to my edit and the final output.
Thank You.

[Arwa Merchant]

Hello all
I have been reading and following all the threads related to HDV worflow. I am in Dubai, United Arab Emirates. I am working on an hour long documentray shot completely on HDV using the Sony camera. I have about 22 hours of footage, which I will be looking at tomorrow.
I wanted some suggestions on my workflow. I am working with FCP 5, a G5 dual processor, 2GB, no capture card, but can get one if needed.
I have been deciding to edit native HDV, capture all the footage via firewire onto 500GB FW800 drives. But it seems like almost everyone prefers converting the HDV footage to an i-frame format. but what’s the point of having the native codec, if you are going to convert everything.
Secondly, considering the amount of footage I have, i can’t convert it to a 10-bit uncompressed format. It would take way too much time.
My next option is to downconvert my HDV footage during capture to DV-PAL. Am I going to lose a lot of picture quality? What are the cons if I stay native?
My master has to be a digibeta PAL.
Please advise me on my workflow. I don’t have a capture card, but I can get one if it is essential to my edit and the final output.
Thank You.

[Arwa Merchant]

Hello all
I have been reading and following all the threads related to HDV worflow. I am in Dubai, United Arab Emirates. I am working on an hour long documentray shot completely on HDV using the Sony camera. I have about 22 hours of footage, which I will be looking at tomorrow.
I wanted some suggestions on my workflow. I am working with FCP 5, a G5 dual processor, 2GB, no capture card, but can get one if needed.
I have been deciding to edit native HDV, capture all the footage via firewire onto 500GB FW800 drives. But it seems like almost everyone prefers converting the HDV footage to an i-frame format. but what’s the point of having the native codec, if you are going to convert everything.
Secondly, considering the amount of footage I have, i can’t convert it to a 10-bit uncompressed format. It would take way too much time.
My next option is to downconvert my HDV footage during capture to DV-PAL. Am I going to lose a lot of picture quality? What are the cons if I stay native?
My master has to be a digibeta PAL.
Please advise me on my workflow. I don’t have a capture card, but I can get one if it is essential to my edit nd the final output.
Thank You.