Replies – Forums – William Speruzzi

Forum Replies Created

Page 1 of 2

1 2 →

William Speruzzi
November 7, 2006 at 12:08 am in reply to: Survey For Freelance Editors In NYC

I would like to thank everyone who participated. The survey has been up for about a month and here are the results like I promised:

First off, some numbers –

32 people filled out part 1
23 people filled out part 2

I screen grabbed each section and threw it on flickr, sized up and here they are. Hope this is helpful to others as is was to me.

https://static.flickr.com/112/290966837_3fb8441d89_o.jpg
https://static.flickr.com/104/290966842_f9332f6819_o.jpg
https://static.flickr.com/117/290966844_039ec788df_o.jpg
https://static.flickr.com/99/290966849_4af75940be_o.jpg
https://static.flickr.com/114/290966852_149be2a73b_o.jpg
https://static.flickr.com/105/290966853_99bee1534b_o.jpg
https://static.flickr.com/108/290998020_4bfbc097a2_o.jpg
https://static.flickr.com/117/290998025_14bd714fb3_o.jpg
https://static.flickr.com/107/290998028_eba3306562_o.jpg
https://static.flickr.com/113/290998030_8ef6c95a7b_o.jpg

Again, thanks for the time.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
October 4, 2006 at 11:46 pm in reply to: Survey For Freelance Editors In NYC

You will have to use the links provided above to get to both parts. Please fill out BOTH parts.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
October 3, 2006 at 12:55 am in reply to: Client Login Page

Thanks Sitruc. I’ll check this out.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 29, 2006 at 3:25 am in reply to: Client Login Page

Sorry about that. I know a little HTML, a little CSS. I have crowbarred my way through building a couple of weblogs on WordPress but this is a little over my head.

Basically, I want to give my clients simple access to their work, to have two fields on a client login page, username and password. From that page my clients can access a page that has their video as embedded Quicktime files or a list of sample links that leads them to the embedded video.

I’m using DreamHost, Apache. Thanks for any help.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 24, 2006 at 7:24 pm in reply to: Final Cut Pro Project/Sequence Settings

I was looking at HDCAM too. Good to know about the CC.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 23, 2006 at 9:26 pm in reply to: Final Cut Pro Project/Sequence Settings

Shane,

What format was the master you layed back to?

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 20, 2006 at 4:51 pm in reply to: Final Cut Pro Project/Sequence Settings

Okay so I think I’m set here. This is the workflow I’m looking at:

Footage is shot in 1080/24pA mode, transfered on site to a Firewire drive. Those MXF will be imported into my FCP 5.1 system, converted to Quicktime files remaining on 23.98p. Edit on a 24 timeline by setting up with a 1080i DVCPRO HD preset> altering the timebase to 23.98> Edit!

When the MXF files are transfered to a Firewire drive will they automatically be kept as 23.98 or is there a setting to transfer the footage at various frame rates? What I want to know is do I need to tell the DP to keep it at 23.98 when he transfers?

Re: Monitoring. I’m just going to have to make do with what I have (check my profile to see my gear). I have an older DP 2.0 G5 that isn’t PCI-x/PCIe ready so getting a decent HD capture card isn’t really an option. I’d buy a AJA or Decklink card tomorrow but my G5 doesn’t have the right PCI slots to accommodate.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 19, 2006 at 10:12 pm in reply to: Final Cut Pro Project/Sequence Settings

[Barry Green] “if you use 1080/24pA, FCP can strip out the pulldown and then the file on your hard disk will be 23.976p and not 30i or 60i. During the FCP import the conversion happens and the duplicate fields are discarded.”

That brings us back to the beginning. When I import the 23.976p files from the hard drive what will my A/V settings be for FCP? In the version I have, 5.0.4, there is no choice in the A/V Settings pulldown menu for a 1080p24.

Do I just manual create an Easy Setup or is there a preset with 5.1 which I will be receiving by mail any day now?

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 19, 2006 at 9:06 pm in reply to: Final Cut Pro Project/Sequence Settings

Sounds like a plan. Thanks for the help.

william speruzzi
[digital post-production]
https://www.williamsperuzzi.com/
info@williamsperuzzi.com
William Speruzzi
September 19, 2006 at 7:50 pm in reply to: Final Cut Pro Project/Sequence Settings

Did you edit on a 23.98 timeline with the projects you have done in the past? If so how did it work out? If not what was the deciding factor?

(Sorry I haven’t read all the entries from your site but I will!)

william speruzzi
[digital post-production]
e: info@williamsperuzzi.com

Page 1 of 2

1 2 →