Thibault Carterot
Forum Replies Created
-
Thanks rohit for your answer.
I am using 10.8.3. Is that an issue ?
I’ll try without one of the 690 but It was working great for weeks with both cards… ?
Is resolve only using 1 card ? (it sees both). Do you think 3×680 would be a better ?
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 2x690GTX,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 500, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 9.1.3
-
I’ve got exactly the same problem with one only film material.
But I found out the issue appears also in REDCINEX so it’s not a davinci issue.
I contacted RED and they told me it must be related to the way the material was copied the first time from the disk. I think they used a panavision system to backup the files…
Anyway, it’s very annoying.
It was RED EPIC 5K, RC3 compression
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
Yes, it seems to be the same with all dnxhd files…
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
Rohit,
You were right. I’m stupid, I should have checked !
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
Where can I find the build version info ?
Thanks
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
once unzipped, it seems to be the same 9.0.0 version
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
Yes I agree with you, but I don t know how to change the frame numbers.
For instance, my reel one is at 01 00 00 00 and my reel to 02 00 00 00.And it seems I cannot change thoses numbers after the sequence is created
Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
Thanks but it s not what I meant. I know the target mode.
My concern is to render different timelines into one file.Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
From a “logical” point of view, the track label should refer to the track of the multitrack. It is I think intellectually disturbing to have a label that says track and that in fact affect the whole project !
I still don’t know how to put my lin titles or effects into log and I though that would be great with this option.
Anyway, I think BM is doing a great job. I hope Apple is not going to ruin everything by announcing the end of the mac pro one day !
For what I see, they are capable of doing so…Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1
-
I agree this is very useful but I think It’s not logical
Now there is multitrack, the track node should target the selected track.
There could be a “timeline node”And if you want to apply to the whole projet, it’s easy to copy on all the tracks.
I think it would be a great to have that.
For dailies, you could apply a node for day on track 1 and another for night on track 2 or put the log material on track on with a loglin lut and linear material on track 2 etc…Config : Mac Pro 2010, 12×2,4Ghz, 32Go Ram, 3xFX4000,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, RAID FC 8gb Lacie 24To, CYCLONE PCI expander, Resolve 7.1