[Ted Irving]

Here is a link to what is happening. You can see the alpha being cut as you move the keyed subject around.
https://www.dropbox.com/s/olwl53nd0ldibnf/IMG_2411.MOV?dl=0

Ted Irving
ENG Cinematographer
http://www.beingus.tv
tedirving@beingus.tv
@_beingUS_TV

[Ted Irving]

Just a simple keying of a person over a still background. When trying to move the person from left screen to right everything moves, the background moves as well as if is merged with the top layer person on a green screen.

Ted Irving
ENG Cinematographer
http://www.beingus.tv
tedirving@beingus.tv
@_beingUS_TV

[Ted Irving]

WOW! ok good info. Will look to save and get to that point. By the way, I used the terminal for a new external RAID on my second computer at my other office. Did the simple JBOD setup. However, there is a 4TB, and three 2TB drives in the enclosure. Even with the basic stripe in Terminal the final drive comes out to 8TB total. So, what happened to the other 2TB? Is this a drive order issue?

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Appreciate the info. Yeah kinda new for me. I was following some directions from a friend and really but in the wrong code. I went back and deleted the mirror and went back for the stripe set, or JBOD. I know it’s not the best but I’ll play around with RAID 0, 1, and maybe 5. I’ve been using a SansDigital external SATA case with four drives and HiPoint RAID management software. I recently bought a new Sonnettech USB3/Sata PCIe card so my Highpoint web RAID gui doesn’t work anymore. That led me to the Apple Terminal code. But I believe I’ll go after the SoftRaid. I’ll make a decision here this weekend but appreciate all the info. I basically use the mass storage as a TimeMachine backup of all my work from the three internal SATA drives I have. All of which are 2TB drives. And by Christmas I’ll bump up the system drive to an SSD, then update the internals to SSD. As soon as they get bigger. LOL

Will do the homework! Thanks again.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Ah Nice! Great info. Appreciate it. Will head to SoftRaid.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

I did the update on both my Mac Pro systems (silver boxes) and have had zero issues other than 1, spinning rainbow wheel. It’s occuring more. Seems like El Capitan uses more resources than Yosemite. I’m trying to find a site that lays out the steps to optimize El Capitan for FCPX.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Thanks for the help. I’ll try those. It’s only the effects that come with FCPX that are doing this.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Sorry, ProRes. Figured it all out though. Once in FCPX, once all is rendered, video plays back in real time. No hiccups. External and internal SATA are doing just fine. Once I jump to an Atomos though I’m sure uncompressed editing of NX1 4K is out of the question on my system without converting it. Saving for a Black Vader Mac.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Will tell the instructor. We did the mono export once but not the pan. Thanks

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv

[Ted Irving]

Thanks. Not sure about missing Motion templates but I did just check the index and I see the offending files but they are the same clips I removed and replaced. They are all CAnon 60D clips.

WAIT! Got it! I didn’t clear them off my timeline. I placed the newly imported clips over those. Thanks. All good now.

Ted Irving
ENG Cinematographer
http://www.tedtv.tv
tedirving@tedtv.tv