Simon Carlson-thies
Forum Replies Created
-
I would imagine its in the diskutil command in the terminal.. i would try using the manual command and check it out…
I believe this is correct,
man diskutil
Simon Carlson-Thies
-
If you already have and HDTV use that instead of buying a HD monitor, unless there is some specific thing you need from the monitor, I have had good sucess with that and it saves money…. unless you don’t have a HDTV… in which case go with the monitor…
The monitor is really only going to make a difference if you’re doing real HD not HDV or consumer HD….
Simon Carlson-Thies
-
Look online I get mine from cool drives, then its pretty easy if you can install ram you can do this… and cool drives gives instructions on how to install the drive in their enclosures.
I have done this with many drives and never had a problem…
Simon Carlson-Thies
-
replace the FW cable if that doesn’t work replace the FW bus, which means get a new enclosure….
Simon Carlson-Thies,
Digital Light Graphics And Animation -
have you checked you export size settings to make sure that its not clipping the footage?
Simon Carlson-Thies,
Digital Light Graphics And Animation -
Ok number one I would never keep media strung out over all those drives, the two 250gigs I would stripe them together, and then use the 500gb separately. Also if this is a G4 tower have you maxed out you internal bays?
If not I would try taking the 500gig drive that won’t mount and assuming it doesn’t have a USB connection on it that you can try. I would remove the 500gig from its enclosure and put in an empty bay in your computer and see if that works, if it does verify the disc and then restore your data if necessary. Then try a new enclosure and go from there. If your on a laptop go to a new enclosure and you can also try a new cable. And lose the hub until you get it working.Hope this helps….
Simon Carlson-Thies,
Digital Light Graphics And Animation -
Sure I’ll do it so when I submit my picture, I’ll ask to do that as well, since I already did the bio thing for being added to the Cinema 4D and OSX forums leadership…
Thanks
Simon Carlson-Thies,
Digital Light Graphics And Animation -
Not really, since I don’t know the application that well, I haven’t used it a lot since, I have a 3000 dollar modeling package… but if the fact that I don’t know it at all well is not a barrier then sure….
Simon Carlson-Thies,
Digital Light Graphics And Animation -
Personally I would not clone the windows volume and the mac volume to the same drive, just because windows, has virus problems… and no sense in risking all your data for ease…
Simon Carlson-Thies,
Digital Light Graphics And Animation -
Restart… verify permissions…
then try it again…
Simon Carlson-Thies,
Digital Light Graphics And Animation