[Salah Elfalahi]

Thanks for the replies
I’ve had optical flow added in few deferent formats ( DV,HDV,HD) and in deferent ways (subject moving fast or slow, camera fixed or moving…) ..I always have the same result, the goest like behind the moving subject !!
Thanks

Salah

[Salah Elfalahi]

Lovely tutorial
Thanks very much

Salah

[Salah Elfalahi]

Hi Tony
I didn’t find a Tutorial in videocopilot.net under this name (underground).
Thanks

Salah

[Salah Elfalahi]

thanks gary for the very important informations.
really happy to hear that.
thanks for you all

[Salah Elfalahi]

thanks again rafael
I’ve always wanted to buy one of kona cards but i thought only SDI input would give me better quality than compressor, but if component would do the same, then I’ll go for it.
thanks very much

[Salah Elfalahi]

thats what i needed to know.
thanks

[Salah Elfalahi]

thanks Rafael
but I’m still not certain as my sony deck got firewire and component input and I’v read previously on this forum that a component will give me a very bad quality conversion, and thats why I need to know if possible to convert and export the HD file using Kona to the desktop and then import the SD file back to print to tape via firewire.
thanks
Does that make sense!!

[Salah Elfalahi]

ُthank you all, really appreciate your time
I’ll forget about the capture card then, cause my main reason is to convert full HD to SD and I can’t afford buying the 1500 deck with the kona card. I’ll stick to compressor, as it’s the only option left for me, and print to tape using my deck.
thanks very much

[Salah Elfalahi]

so LHi will do for me

[Salah Elfalahi]

Please Walter, what do you understand from this info below which talk about my Deck Video input/output, as i’m only using firewire so far;
Video input/output
RCA x 1 / RCA x 1
[1Vp-p , 75ohm unbalanced, sync negative
Sync signal : 0.286Vp-p (50i / NTSC) , 0.3Vp-p (60i / PAL)
Burst signal : 0.286Vp-p (50i / NTSC) , 0.3Vp-p (60i / PAL)
S-video input/output
Mini-DIN 4pin x 2
Y : 1Vp-p , 75ohm unbalanced, sync negative
Sync signal : 0.286Vp-p (60i / NTSC) , 0.3Vp-p (50i / PAL)
Chrominance signal : 0.286Vp-p (60i / NTSC),(burst, 75ohm) , 0.3Vp-p (50i / PAL),(burst, 75ohm)
Component video output
RCA pin x 3
Output at 480i NTSC
With[BETACAM] selected in [480i LEVEL] of the [IN/OUT REC] menu
Y : 1 Vp-p (0.286Vp-p sync negative, output impedance 75ohm unbalanced)
Pb / Cb / B-Y , Pr / Cr / R-Y : 0.7Vp-p (output impedance 75ohm unbalanced) (75% color bar with 7.5% IRE setup)
With[SMPTE] selected in [480i LEVEL] of the [IN/OUT REC] menu
Y : 1 Vp-p (0.3Vp-p sync negative, output impedance 75ohm unbalanced)
Pb / Cb/B-Y , Pr / Cr / R-Y : 0.7Vp-p (output impedance 75ohm unbalanced)(100% color bar with no setup)
Output with other settings
Y : 1 Vp-p (output impedance 75ohm unbalanced)
Pb / Cb / B-Y , Pr / Cr / R-Y : 0.7Vp-p (output impedance 75ohm unbalanced)(100% color bar with no setup)
480i / 480p :
Y : with 0.3Vp-p sync negative
1080i / 720p :
Y / Pb / Pr : with 0.6Vp-p 3-level sync
i.LINK
6-pin
Digital uncompressed output
–
Phones
–
LANC
Stereo mini-minijack ( 2.5 mm)
Control S
Stereo minijack ( 3.5 mm)
Audio input
RCA x2,stereo
Input level : -10dBu, input impedance: min. 47 ohm unbalanced, max Input level : +18dBu (approx. 6Vrms) 60i , +16dBu (approx. 5Vrms)50i
Audio output
RCA x2,stereo
impedance : max. 1k/ohm unbalanced, Output level : -10dBu (=full bit -20dB) impedance 47 ohm unbalanced 60i, -10dBu (=full bit -18dB) impedance 47 ohm unbalanced 50i
LCD monitor
thanks
–