Peter Corbett
Forum Replies Created
-
Have you tried checking the ASIO settings in the audio section of Premiere preferences and moving Decklink to the top of the list?
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
Hi Kristian,
As I emailed you and let Leo know, I now have SDI output to external monitor, but only when Premiere is running. A little note in the Readme will solve any more angst for other downloaders unaware of the issue.
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
Well it ain’t working on Decklink Extreme HD either. Seems weird that this driver would be released when it doesn’t actually appear to work on Vista.
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
I’m using a X7DA8 but am switching to an Intel i5000VXN SATA because of the PCIe slot layout. On the X7, with the 8800 GTX taking up two slots, the Decklink blocks the air intake of the VGA and it overheats.
But you may not have the same situation with a Multibridge. The motherboard works well with 10-bit HD.
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
[Leo Baker] “The errors I am getting are as follows;
1). ck on the Multibridge configuration screen to get to the controls for DVI etc. I get an error message “Deckcp.exe – Unable to locate component”
This application has failed to start because MFC71U.DLL was not found. Re-installing this application may fix this problem.
2.) I try and play any music or sound from Widows Media Player and I am getting an underwater sound and the audio sounds choppy and stuttering effect/sound.
3.) I lauch a BMD project pre-set from Adobe Premeire Pro 2.0, such as a BMD-DV project I set the preferances of the Audio channels to map to Decklink. I get no VU levels and no sound comes out of my speakers. The sound is connected to the Multibridge Extreme Pci-e from the analogu RCA outs to a mixer then speakers.
If I change the preferances to the on board Premeire Prosound then the VU meters in Premiere pro 2.0 alter and display but still no sounds.
4.) I am not getting the display graphics card listing as Blackmagic for the extended view. Either in device manager or display settings.
Anyone had similar problems?”
I’m on Decklink HD Extreme Leo. Even though BM have released Vista drivers, there are possible problems with running the whole Production Suite on Vista. Check the official Adobe forums for more info;
https://www.adobeforums.com/cgi-bin/webx/.3bbdfa9a/?@634.r3e6g4U84ir@
I can’t get the Decklink to appear in the display properties and I’ve tried everything. Also having problems with RS422 and Audio components of Decklink on Vista 32. Are we the QA component here?
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
I’ve installed, uninstalled and reinstalled 6.0 drivers several times on a standard Vista 32 installationw without success. The BM display does not appear in Device Manager or Display Properties.
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
Thanks Jeff for chiming in. Although you say the HPX3000 is no Varicam, I can’t see how it won’t have a serious impact on the Varicam with it’s native 2.2m 1920×1080 imager and 10-bit recording to AVC. It’s inevitable that this camera in combination with the new low-cost 16gb and 32gb P2 cards will be a major viable alternative for all those markets you mentioned.
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
Tried installing 6.0 on my Vista 32 system but although the software and drivers install, the Decklink display does not appear in the Device Manager or graphics display properties. And the RS422 serial and audio drivers won’t install. XP SP2 works fine.
I have a 8800 GTS VGA and Audigy 4 Pro sound card. Both have the latest Vista drivers installed. The mobo is a Supermicro X7DA8. Any clues Kristian?
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
Sorry, me again. Wow, I’m getting RT downconverted playback of uncompressed 10-bit HD and also real time downconverted playback of native HDV files in an uncompressed project without rendering. I’m using a HD Extreme with YUV monitoring on a 14″ component standard-def monitor.
This is quite a leap. Well done BM guys!
Peter
Peter Corbett
Powerhouse Productions
http://www.php.com.au -
New features look cool for 6.0.
* Windows Vista 32 bit support