Mikhail Puzyrev
Forum Replies Created
-
+1
It would be great to have a red tab with controls mapped to panel also.
-
No, CPU is slower. I’ve tested it in many ways. Clipfinder is slower on my h-osh.
-
I’ve made a test today – put geforce 480 alone (with 2 displays attached) into a hackintosh and got twice as fast debayer vs my 2008 Mac Pro with 285 and gt120.
-
I also had problems with just simple sped up from 25 fps to 100 fps shot. It appears at davinci as 25 fps shot – it didn’t read edl speed information.
-
Which codec did You use saving to quicktime?
-
Quicktime Pro can open image sequence and save mov file.
-
“The G5 is a boat anchor in 2010.”
No, G5 with Scopebox and old Kona or whatever with sdi input -is a nice oscilloscope
-
Yes, but also needs soldering bigger chip. Mine is working nice.
-
Thank You Bob! Actually it’s Google, I’m colorist and broadcast designer running small design boutique. One month ago I knew only “ls” and “cd” commands. I couldn’t afford hiring another guy to do it, so just started to google and to read articles – and it appeared not very difficult. But time consuming ).
-
Hello Bob
1. On the procurve it is very easy to setup link aggregation using web GUI, it has a preset address 192.168.2.10
2. Macs use native afp, they see server as mac server, because on the server side (which you call PC – linux (centos 5.5)) I have installed Netatalk – which is linux implementation of Appletalk. It was the hardest part for me and I still wonder how it works ))))). https://netatalk.sourceforge.net/
3. Firs I checked intel.com if the network card supports jumbo frames. Then either use linux GUI network administration to set the MTU of single network cards. In case of link aggregation – it’s called “bond” when linuxed )) You have to do some typing work – there are files at /etc/sysconfig/network-scripts/ifcfg-eth0, …eth1, …eth2,…eth3 etc. You should create new text file with the name ifcfg-bond0 and set MTU=9000 or whatever You want there. It will override MTU settings of the bond members mtu. For different linuxes this procedure slightly different. I used this guide –
https://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5/html/Deployment_Guide/s2-networkscripts-interfaces-chan.html