Mfassett
Forum Replies Created
-
Yes, it has been moved… and I find it strange too. When you bring up the “log and capture” window, you can find the option in there (can’t remember exactly where, but there’s a checkbox you need to select).
——–
-
I haven’t speed tested the drives (just installed them yesterday)… no, no RAID protection, will backup to gigabit NAS every night. I will report, though, when I’ve tested the drive speed if y’all would like.
As long as it’s faster than FW800 (which it likely is) it’s good enough for me.
——–
-
I have a promax eSATA RAID, with a eSATA controller in the expansion slot.
——–
-
Thanks, but now that I’ve had a taste of 30″ I’m not going back. I don’t need the input, but if that’s my only HD-SDI out option running the 30″, so be it.
——–
-
Yea, I get that, but all I really need now is HD-SDI output… I’m sure once I get it I’ll find use for all the other features.
——–
-
Thanks Shane… of course, it’s three times the money of the MXO, but life is hard. 🙂
——–
-
Sorry Jeremy, wasn’t meaning to disrespect you! It’s always good to get 2nd opinions, just in case there’s a creative solution you or I may not have thought of.
Thanks again for your recommendation, that’s most likely what I will end up doing.
——–
-
Actually if you re-read my post… I don’t think I wrote “HD dual link.”
I have an apple 30″ which works great via dual link DVI from my Macbook Pro 17″. No problem.
The Matrox MXO connects to the DVI output of the Macbook Pro and provides an HD-SDI output (which is what I need) among other things.
The Matrox MXO doesn’t support dual link DVI.. in other words, the Matrox MXO connects to the laptop’s DVI output and provides a DVI output for a monitor.. but the MXO’s DVI output is only single link, so it will only support up to 23″ monitors. Thus, either the 30″ goes or the MXO goes. Make sense yet?
So, thus.. what I need is an HD-SDI output to drive my HD video monitor. The MXO doesn’t work for me.
Whew.
So are there any other choices other than the ioHD? That’s the big question y’all!
Listen to the new Particle Salad CD at https://www.particlesalad.com
-
I do not have a 24p advanced pulldown capture option.
I don’t know if it was shot 24p advanced or not… they shot it on a panasonic vx-100… does that impact how I should capture it?
I currently have it on a 24p sequence… but I didn’t capture at 24p (though I can easily recapture).
Should I recapture and change the frame rate to 24fps and change to progressive?
-
I just searched the FCP manual for “advanced pulldown removal”… not coming up with anything…. more info please? Thank you…
Listen to the new Particle Salad CD at https://www.particlesalad.com