[Max Frank]

Thanks, everbody for your input.

Yours,

Wayne

[Max Frank]

Thanks, everbody for your input.

Yours,

Wayne

[Max Frank]

I’ve managed to get capture PAL from my NTSC PD-150.

How? A bit of a work-around.

1. Easy settings – PAL DV
2. Open log & capture window.
3. Play DV Pal tape for a few seconds (L &C Screen says “no preview available)
4. Stop tape.
5. Clost L & C window (Apple-8)
6. Remove FW cable from camera.
7. Put FW cable back into camera.
8. Open L & C window.
9. L & C then should see the PAL signal.
10. Capture as normal.

If the above doesn’t work, I try different variations of the above – opening and closing the L&C window, replacing the camera, etc – but after a few attempts I’m usually able to get PAL (and even PAL DVCAM) on my NTSC PD-150.

I hope this helps.

Wayne

[Max Frank]

Any reliable caffiene delivery system works for me.

😉

Wayne

[Max Frank]

I’ve been running my speakers of the headphone socket – or out of the camera for years, (G4 & G5) and I’ve never had a problem. It could be that you have a bad connection, or a faulty wire somewhere. You may want to sort that out rather than purchasing expensive equipment.

Yours,

Wayne

[Max Frank]

I output from QT or FCP as an MP4 with the ADSL/Medium setting using QT6.5

And as long as the client has QT 6.5 or higher (free download) it works perfectly.

Wayne

[Max Frank]

I can’t speak for Nattress, but I’ve had amazing results with Magic Bullet.

Wayne

[Max Frank]

Thanks for the reply.

Yes, it has a lot of ‘holes’ and texture.
It will need to be on a transparent background.

Wayne

[Max Frank]

Hi,

If you don’t want to upgrade to FCP 5 – Digital Heaven has a multi-cam software package that I believe is reasonably priced and works well.

Wayne

[Max Frank]

I use expose.

No need for any keystrokes.

W.