-
How are you extrenal speakes hooked up?
we are looking for new or better ways of hooking up external speakes to our fcp systems, for some crazy reason we are now getting static / interference in the speakers. thanks
-
7 Replies
-
The speaker outs of the G5 to a Behringer 8 channel mixer, then to my Advent Speakers.
Shane Ross
Alokut Productions
http://www.lfhd.net -
G5 to Aja LA to Beringer mixer to Sony amp to Sony speakers.
Also running a set of Altec/Lansing’s out of the line out from the G5.
Tom -
AJA IO to Mackie VLZ 1202, to self powered M-Audio BX-8s. I also have the decks and the computer output run to the mixer so I can monitor everything from the same speakers.
-
I’ve been running my speakers of the headphone socket – or out of the camera for years, (G4 & G5) and I’ve never had a problem. It could be that you have a bad connection, or a faulty wire somewhere. You may want to sort that out rather than purchasing expensive equipment.
Yours,
Wayne
-
Blackmagic decklink extreme out to mixer, mixer out to amp. I also have the deck and computer going to the mixer, but I don’t use the computer’s out for anything other than system sounds and iTunes, never for production. I always use the decklink’s out for production, since I monitor on an external TV connected to the decklink.
Thanks,
Gary -
AJA IO LA to Mackie 1402 mixer to Mackie powered HR824s monitors. G5 output to rca ‘tape inputs’ on 1402.
-
Mostly Decklink coax spdif out to flying cow to yamaha (MSP5) powered monitors. We got a couple of Edirol MA20D powered monitors too which have both optical and coax in so you can get the decklink and G5 spdif without unhooking anything.
Glenn Stewart
1k studios
Reply to this Discussion! Login or Sign Up