[Lav Bodnaruk]

… perhaps slightly off my original topic, but since I bought this new machine and it has a SCSI 300GB 15000rpm drive in it, would you recommendation be to use that drive for OS or something else?

I am also thinking about seeing to GHOST my current OS drive from the computer mentioned above to the new xw8400 300Gb 15,000rpm drive.

Any thoughts on that?
Thanks again!

Lav

[Lav Bodnaruk]

Hi Mike,

the computer was not qualified by Avid, but it had no problems running the MC till I put the new video card in it – the qualified nvidia quadro fx3500.

It was a gigabyte x38 ds5 motherboard, with q6600 quad core cpu, 4GB of 1066MHz RAM, and bunch of different drives in RAID 0. The video card with which the MC worked for long time (I cut a film on it with no probs) is GeForce 7600GT but when I put the qualified FX3500 Quadro in it, I lost the FSP.

I am yet to build up the xw8400 (install the software, etc) and see if the FX3500 works OK in this set-up or if something similar will happen.

Thanks!
Lav

[Lav Bodnaruk]

Hey guys,

I am still without FSP even after re-installing everything. I took some days off to attend a film festival and have bought a HP xw8400 workstation up on my return.

I will now put my fx3500 into this unit and see if this will make any difference as I was out of option on why the FSP was not working with my current set-up.

The most puzzling thing of all is that the Video card was not showing up in the avid as a hardware option and that whilst I had the none-certified card (Nvidia GeForce 7600GT) the FSP was working…

Hopefully now that I am installing both Avid and Windows from stretch on this dual quad core xeon machine, i should be OK.

I will post the results as I get there eventually

many thanks
Lav

[Lav Bodnaruk]

Hi there! That must be it!
In my Video Display options I do not have the Graphics Card option, ONLY the Software OpenGL? Why is this? Is there a setting I have to do elsewhere to make sure I can get the Hardware option?

I am assuming this must be the cause then.

Remember, I did have the FSP working with a Nvidia GeForce 7600GT card in there, with SoftwareGL. I must be able to change something in my system preferences that makes Avid understand that the new card FX3500 can work as Hardware OpenGL.

Any info on how to work this about would be much appreciated! I am crossing fingers that this is my core of the problem

Thank you for mentioning this Annael!
Best,
Lav

[Lav Bodnaruk]

Thank you for your reply Michael. I was in fact running 7.4.X PRO QT, which never presented any problems with the uncertified Nvidia GeForece 7600GT that i had prior to this FX3500 Quadro card for playback of the Full Screen.

None the less, in a hope it would help, I have removed it and have gotten the QT 7.3 version on there now.

Unfortunately, there is still no FSP.

And yes, I did follow the instructions as per that link you had posted.

I am on the end of my wits here. No idea what else to have a stab at. If anyone thinks of anything, please let me know. I am at that stage where I am considering a complete format and start from scratch, even though I am in the middle of the project right now, because editing without FSP is not my thing… and I am really only set-up for that to work (i.e. no client monitor at all right now)

thanks again
Lav

[Lav Bodnaruk]

Hi guys,
Yes, I am running the driver 91.85 which was found in the Nvidia Utilities folder of the Avid (Program Files). I have set this driver up through hardware acceleration as mentioned in the read me file (not that any of it enabled the fulls screen playback).

I am running this on XP SP2

My machine is made up of: Intel Core Quad Q6600 @2.4GHz processor, Gigabyte x38 DS5 motherboard, 4GB of 1066HMz RAM (although only 3.5GB shows as it is 32bit OS not 64bit), the mysterious Graphics Card “Nvidia Quadro FX3500”, bunch of drives i.e. one for OS that is 150gb SATA II and 4 on raid 0 (sata II 320GB).

I also have BlackmagicDesign Multibridge but that is not plugged in when I try and run AVID. This was purchased for any imports I may need to do (instead of Mojo).

Hope this helps.
For some reason I am thinking it might be quicktime that is clashing with the card? Is there a particular setting one has to do for the quicktime to work with Avid? I remember having to go to Advanced TAB of the QuickTime and switching SAFE MODE GDI only on. This is something I had to do when I had my Nvidia GeForce running as the AVID was popping up with error messages. Now, with the FX3500, regardless of what I click there, there are no errors – but also no FSP.

Thank you!
Lav

[Lav Bodnaruk]

Hi JOE,

thank you for your post. Unfortunately, I am still no where closer to getting the FSP to work. I have take the driver of the new card off, removed the hardware, restarted numerous times and basically did everything from scratch. I then got it back up with the 91.85 driver.

Again, no full screen playback is available.

I have configured the advanced settings of the card as per avid help file, moving the Hardware Accelerator slider. I have even tried locking FSP in the console…

If anyone has any ideas of why I am unable to get the FSP going on, please let me know? I am doubting that a card can be damaged, as everything else is working. I am doubting that there is any issues with the monitors used, since the FSP worked on my previous card (which i have also tried to put BACK IN and it still works with it! how bizzare!) which suggests that the settings in the software are also OK?

My guess is that there is a clash between the settings of the card and the Avid, and that it is probably something really obvious…

Thank you!
Regards,
Lav

[Lav Bodnaruk]

Thanks Joe.
I am actually using that particular driver right now and there is no Full screen Preview. The message is that typical one that states the graphics card is not supported and to visit the avid support page – it doesn’t give me any more info on why it is not working.

Any thoughts on what it could be if not the driver?

thank you
regards,
Lav

[Lav Bodnaruk]

Hi guys,

I thought I pop back up on the forum and report that I have managed to get the vision onto my HDTV LCD via RGB out (not DVI out) – I just had to un-tick the ‘enable video desktop’ to get that done.

The edit preview is now on the HDTV and NOT on one of my 19″ LCDs, which I was hoping to keep. (I used to have full screen preview on one of the 19″ LCDs)

I guess I was hoping to keep my settings as they were and just use the signal out of BMD Extreme for client preview monitoring – pointing towards the couches and coffee machine 😉

Does anyone have it set-up as such?

i.e. two LCDs, one full screen preview and BMD Multibridge Extreme output (DVI or RGB) for a client monitor? The BMD output could be to 3rd LCD – dell/apple 30″ or some random HDTV LCD or Plasma

Ill dig more but am on a good track.
Thanks !
Lav

[Lav Bodnaruk]

What about HP’s 30-inch LP3065 LCD?
Does that compare to either two mentioned already?

I am in the market for one two and am looking at the Dell.

Lav