Juan Salvo
Forum Replies Created
-
Which HD Link model is it? Only some models can do 2k. requires dual-link DVI.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
That might be your problem… but no i meant like a video hub or other router.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
Are you going through a router or patch bay?
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
There is an archecture difference between the two cards (actually two architecture revisions between them) and just as the gtx680 with 3x the number of cores as a 580 doesn’t perform 3x faster, the core to performance relationship is not a linear one.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
If the sonnet is shipping it just started doing so recently.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
Try a crossover cable and go into the system directly.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
It actually does matter you’re on a windows machine. You need to disable your firewall and make sure you have your network set to something recognized. Windows was probably blocking the port you were trying to use.
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
You did set the ip and port, then restart resolve, correct?
Colorist | Online Editor | Post Super | VFX Artist | BD Author
-
You need to find the ip address of the JL Cooper… i believe it’s “shift” + “assign” this will allow you to see the current address. You do need to read the eclipse manual and have an understanding of how IP works.
Additionally it says this in the Resolve manual:
If using a JLCooper Eclipse CX, follow the Eclipse
CX documentation to connect and configure it with
an Ethernet port on your Mac. Then launch Resolve,
use the Preferences to select the Eclipse CX panel
and click ‘save’. If you have changed the IP address
or port from the default panel settings, enter the IP
address and port number for your panel and then
click ‘save’. Restart the DaVinci Resolve application
and you will see the panel menus as soon as the
application starts.Reading through the eclipse ethernet config guide might also help.
https://www.jlcooper.com/_downloads/eclipseseries/Eclipse_Ethernet_Software_2.6.pdf
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Current tbolt is roughly pcie x4 lanes. So the equivalent of the slowest slot in the current Mac pros.
There have been several other pcie to tbolt chassis announce, some go back almost two years. None have shipped. This is a bit of a pipe dream right now.
By the time CUDA processing over tbolt is truly a reality I suspect nvidia will have released a line of thunderbolt tesla boxes.
Online Editor | Colorist | Post Super | VFX Artist | BD Author