Replies – Forums – Juan Salvo – Page 40

Forum Replies Created

Page 40 of 145

← 1 … 39 40 41 … 145 →

Juan Salvo
March 4, 2013 at 5:18 pm in reply to: How would I get Sony F55 footage into Resolve the right way?

Could this be the debayer issue they pushed out a firmware update to address? What firmware are you running?

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 3, 2013 at 11:40 pm in reply to: How would I get Sony F55 footage into Resolve the right way?

Have been working with f55 footage a couple weeks now. XAVC and RAW, have not seen this. Are you trying to use ACES by any chance?

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 3, 2013 at 4:24 am in reply to: Video Capture failing with Blackmagic SDI card

What codec? What drives? What system/OS?

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 2, 2013 at 7:50 pm in reply to: Your opinion on going from SD to HD

Resizing is done on input. First.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 2, 2013 at 7:49 pm in reply to: Temporary software dongle ?

Buy/borrow another dongle. Or install lite and use that.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 1, 2013 at 9:17 pm in reply to: Can I continue to use my PVM and BVM monitors with Resolve?

I don’t think the g20 he describes is HD. Also the “auto calibrate with color bars” function, just sets and adjust the input signal… not the display.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 1, 2013 at 4:25 am in reply to: Can I continue to use my PVM and BVM monitors with Resolve?

I have no idea what kind of shape your monitors are in, and I’m not familiar with them. I was just making a general statement about CRTs. Like I said, if it’s a practice monitor and you can get a signal on it. Go to town. You said you weren’t doing professional gigs on it. If you know someone with the appropriate probe, I understand the BVMs generally are able to do a self calibration mode. I’d track down the manual for your model for more info.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
March 1, 2013 at 12:58 am in reply to: Can I continue to use my PVM and BVM monitors with Resolve?

While LCDs are remarkably stable there are very few I’d consider grading quality. Literally a handful of models. I’d much rather use a CRT than most LCDs. Particularly a BVM. It’s true that they require recalibration, particularly as the tube and phosphors age, but I don’t think it’s a daily task at all.

If it’s as a practice screen, I say go for it. As far as CRT replacements, FSi, Sony OLED or Dolby Reference are pretty good choices.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
February 28, 2013 at 5:54 am in reply to: Blue only node

Not saying it’s a waste of time to try, saying its not relavent to solide state displays. I suppose you could still use smpte bars and a blue gel to adjust saturation, but phase/tint, should not need adjusting in a digital world.

That said, good advice and a gel recommendation here, from a doc aimed at CRT displays.

https://www.synthetic-ap.com/tips/calibrate.pdf

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com
Juan Salvo
February 28, 2013 at 3:44 am in reply to: Blue only node

You can’t do this in the outgoing signal path, it has to be done on the display. It’s literally shutting off R and G gun in a CRT display, doesn’t matter in a flat panel. But if you want to do it anyway use a blue gel over your eye.

Colorist | Online Editor | Post Super | VFX Artist | BD Author

https://JuanSalvo.com

Page 40 of 145

← 1 … 39 40 41 … 145 →