Replies – Forums – Ikandi Tom

Forum Replies Created

Ikandi Tom
April 18, 2007 at 11:16 pm in reply to: Help! AJA Kona output to hdcam gives nothing but noise and ghosted image.

Just tried that, didn’t fix it, but i see where your headed! cheers.
Ikandi Tom
April 18, 2007 at 9:58 pm in reply to: I know where I’m NOT buying an IO-HD

I’m with you Ben, just checked the upgrade price for Creative Suite…. same thing. Glad I’m goin over the pond this summer. I’ll have to stock up.
Ikandi Tom
April 18, 2007 at 9:52 pm in reply to: Help! AJA Kona output to hdcam gives nothing but noise and ghosted image.

Thanks Tom, Using 8-bit. .I kinda have it workin now, I can’t do a digital cut as that seems to cause the problems, now exporting it straight out as playback, luckily this film fest didn’t request clocks and piece kinda fades in. I Managed to manaually get the piece within 4 frames.

Using 8-bit.

Thanks, Tom
Ikandi Tom
April 18, 2007 at 8:40 pm in reply to: Help! AJA Kona output to hdcam gives nothing but noise and ghosted image.

Hey, helpful link, but still no joy. ouptu loop looks good, just geen pixelated noise and ghosting when I playback tape.

I have ref in, but, I’ve now set the servo/av reference on the deck to AUT01, which, according to the manual should switch to an internal reference signal if the OUTREF is not connected,

still no joy, any more ideas? could it be clogged heads, i heard these thimgs clog up easy?

Thanks, Tom
Ikandi Tom
April 18, 2007 at 7:38 pm in reply to: Help! AJA Kona output to hdcam gives nothing but noise and ghosted image.

Thanks Jeremy,
Yes I have done, aswell as other options. However there is no 1080 50i option, so I have tried using 1080i/25, . Am I wrongly presuming tius is the same thing? If so how do I export 1080/50i.
also the Kona control panel Frame buffer always switches to DVCProHD50. Think this may not be helping matters?
Ikandi Tom
April 18, 2007 at 7:19 pm in reply to: Help! AJA Kona output to hdcam gives nothing but noise and ghosted image.

Thanks for youe help.
I have set the deck to int ref sync.

Getting the same noise through the monitor. makinbg me think it’s not the tape.

The project was shot on HDV 1080 50, edited on and HD timeline, I’m trying to out put it to 1080 50i (have also tried 25p). Have renderd several versions of timeline. Still no luck.
Any ideas?

Cheers from the U.K
Ikandi Tom
April 11, 2007 at 3:19 pm in reply to: HDV project output to HDcam 1080i 16×9

Thanks for your help and quick responses guys. I’m going to go ahead with the deck then.
Tom