Harley Michailuck
Forum Replies Created
-
You should be able to get Composite output by hooking up the Y/G output from the Kona 2 card to the Composite input on your DVD recorder. Of course you’ll have to open the Kona Control Panel and set Analog output to Composite/SVideo.
HTH
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
What David said…
… and it’s fine here – ovelay TC in FCP 5.1.2 Canvas matches burn TCBest,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
Harley Michailuck
October 19, 2006 at 4:57 pm in reply to: 5.1.2 Canvas/Viewer changes when playing HD clip…[walter biscardi] “Just ignore it.”
Thanks Walter, but it’s pretty hard to ignore.
Any idea why this happens… and on my system only on HD?
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
Harley Michailuck
August 24, 2006 at 3:49 pm in reply to: Help! No analog audio from K3 breakout boxAnother thing… how are you monitoring the RCA analog channels? Make sure you’re connected to an appropriate input on your mixer, deck, or whatever and that the audio signal path is routed to the speakers/headphones.
Put Bars and Tone on a timeline and play it.
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
Harley Michailuck
August 24, 2006 at 3:35 pm in reply to: Help! No analog audio from K3 breakout box[Mike Parfit] “I’ve tried every configuration I can think of with them to be sure I’m sending the sound to the Kona 3, using easy setup, etc. Still nothing.”
Not in front of my system (Kona 2) right now… the only other thing I can think of off hand is to reverse the cables end for end from the Kona card to the K-Box. I seem to remember this was a fix for this problem with the Kona 2 and K-Box. Obviously, you’ll have to power down your system and as well as anything plugged into it.
HTH
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
Harley Michailuck
August 24, 2006 at 2:50 pm in reply to: Help! No analog audio from K3 breakout boxHave you checked the audio settings in the Kona Control Panel?
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
Any changes, fixes, enhancements… or just Universal Code?
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
[David Battistella] “What happened to FCP rescue? Not avaiable anymore?”
Now labeled FCP Rescue 5 available here:
https://www.macupdate.com/info.php/id/14729
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada -
[AJA Sales Department] “
-
[Topher944] “I was utilizing a Seagate External Firewire 400 drive on my G4 867 M100 8.2.2/OS10.3.9 with realtime fx and p6000/dv board.”
This has been covered here before… I believe it’s the old realtime fx and FW hard drive conflict that has been known for three or four years now. Do a search in this forum for ‘realtime fx’ and you’ll find lots of related posts – most recently answered by Floh in this post.
https://forums.creativecow.net/cgi-bin/new_read_post.cgi?forumid=4&postid=855305
Best,
HarleyHarley Michailuck
Brass Orchid Post fx
Saskatoon, SK Canada