Replies – Forums – Grant Keiner

Forum Replies Created

Grant Keiner
February 23, 2012 at 7:34 am in reply to: Quadro 4000 not seen by resolve

latest drivers did not work

Quadro shows up in system profiler

monitors are connected to 5770

as for power. I am fairly certain it has power. the quadro works as a gfx card. how and what do I check for this?

thanks for your help.
Grant Keiner
February 21, 2008 at 11:18 pm in reply to: suggestions for the off-line edit

Thanks For the tip!
Is there a particular easy setup I need to choose. Or are ther settings I need to change to cross-convert on the fly?
-G
Grant Keiner
February 20, 2008 at 12:38 am in reply to: suggestions for the off-line edit

Russ,
Thanks for the link. I was having trouble finding it on Black Magic’s site.
-G
Grant Keiner
February 20, 2008 at 12:26 am in reply to: DVCPRO HD 720p cross conversion? Possible?

This is a total hack but it might work.
change your preset to the appropriate 1080 easy setup.
create a new sequence. Copy and paste the footage from your 720p timeline into the new 1080p timeline.
You might have to scale everything up(use paste attributes), but FCP should be able to handle that in realtime without rendering.
-G
Grant Keiner
February 20, 2008 at 12:00 am in reply to: suggestions for the off-line edit

Shane,
Would you happen to know if the decklink HD Extreme can capture 1080 and transcode to 720 on the fly?
-Grant
Grant Keiner
February 27, 2007 at 8:41 pm in reply to: aj hd 1400 error on capture

Seeems to be the problem is my Xserve RAID. I can not pinpoint the issue exactly. But The problem only occurs with the RAID I was atempting to capture to. I can capture to another internal dirve. and different Xserve and have no problems. For some reason it is this one RAID. So, I made sure jounraling was disabled. disabled cache clearing and am conditioning the RAID.
I will post a follow up.
Grant Keiner
February 27, 2007 at 7:04 pm in reply to: aj hd 1400 error on capture

5.0 is better but not perfect. In 5.0 I can capture the 720p 30fps fine and it removes the pulldown, BUT and this is strange, it is overshooting the outpoint. That is to say. I set my oupoint at the end of a take or the point I want stop at but when I capture the deck will keep capturing well into the next take despite the fact that the timecode is not what I set it at.

Anyone care to guess at what is going on here. This has been a frustrating experience with the ajhd-1400. I have a 1200 on the way hopefully it will yeild better results.

-G
Grant Keiner
February 27, 2007 at 6:48 pm in reply to: aj hd 1400 error on capture

the footage was shot at 720 30fps. which if I uderstand correctly is basically removing everyother frame from the 59.94 stream yeilding a 29.97 clip.
yes. I am doing a couple tests and it seems to be an issue with 5.0.4 I have another machine that is still at 5.0 and teh capture seems to be going fine.
I’ll keep you all posted.

Grant