[Erik Hermesman]

MOJO will give you RT firewire output to a client monitor.

[Erik Hermesman]

The new version of BCC {4.0) allows you to do bezier curves with the pixel chooser.

[Erik Hermesman]

There is actually a tutorial right here on the COW.

https://forums.creativecow.net/cgi-bin/page_wrapper.cgi?forumid=27&page=https://www.creativecow.net/articles/rippon_richard/cloud_flythru/index.html

Good Luck!

[Erik Hermesman]

The HDV version of AXP HD will be available for download at avid.com on saturday.

[Erik Hermesman]

There is an effect that does jsut this in the plasma wipes palette.

[Erik Hermesman]

Yes I did. Nothing on the Website.

I emailed them, asking if I could recieve a copy.

[Erik Hermesman]

Ok,

First off I forgot to say that I bought the mixer used off ebay for $70.

Now here is where I am after experimenting a little..

I have narrowed the problem down to the mixer monitor amp outs. (Mabey one of the resistors is blown?)

I plugged the cables that I had going to the monitor amp outs into the headphone jack through adapters and sound plays through both speakers.

Is there an online circuit board sematic that I can look at for this mixer.

Anyone have any ideas what may be wrong.

I will bring it into a tech and see what he says about a price to repair if I cant fix it myself.

Or I may just go ahead and demand my money back from the seller.

[Erik Hermesman]

Ok,

First off I forgot to say that I bought the mixer used off ebay for $70.

Now here is where I am after experimenting a little..

I have narrowed the problem down to the mixer monitor amp outs. (Mabey one of the resistors is blown?)

I plugged the cables that I had going to the monitor amp outs into the headphone jack through adapters and sound plays through both speakers.

Is there an online circuit board sematic that I can look at for this mixer.

Anyone have any ideas what may be wrong.

I will bring it into a tech and see what he says about a price to repair if I cant fix it myself.

Or I may just go ahead and demand my money back from the seller.

[Erik Hermesman]

And dont forget. There are two fluid film plugins.

FLUID FILM – PAL

FLUID FILM CADENCE – NTSC

The fluid film plugins are only available in Avid Xpress Pro 4.5 and up

[Erik Hermesman]

Just wanted to say I fixed the problem.

I just recaptured the tape with the same timecode in and out points as the tape that was off line.

Then I replaced the old offline master with the new one using the same name.

I then relinked the master to all the sub clips and all is good again.

I will be sure to mark in and out points for now on when capturing media. (A tip from a user on the avid.com forums)

Thanks for taking the time to help!