Forum Replies Created

Page 2 of 2
  • Din Noor

    January 22, 2009 at 8:14 am in reply to: application error

    zane,
    thks, but was just wondering why some machine shows (2 out of 4) it only. All are 10.5. in POWERMAC G5, hmm..

    sam

    be calm & patience.

  • Din Noor

    January 22, 2009 at 7:52 am in reply to: Error encountered (L&C)

    Yes Andy,
    i do use the same camera & cable too. Hope to hear from u soon..thks

    be calm & patience.

  • Din Noor

    January 21, 2009 at 3:48 am in reply to: PHU-60K with HVR-Z7 possible?

    Craig,
    thks for the advise & recommendation..me will get the HVR-DR60..

    be calm & patience.

  • Din Noor

    January 15, 2009 at 3:52 am in reply to: camcorder with mic input

    Hi Ty,
    thks for the post & recommendation..will keep in touch..thank you again..
    Rgds:
    Din

    be calm & patience.

  • Din Noor

    January 14, 2009 at 5:14 am in reply to: camcorder with mic input

    Hi Mr Ty Ford..
    thks for your post..the camera is the SONY HDR-SR11E Full HD recording camcorder..i`m just finding an alternative from BEACHTEK products. hope you could recommend..thks

    rgds:
    Din

    be calm & patience.

  • Hi Kevin,
    So the o/p you are getting is directly from the camera head?.If YES, i will suggest you factory reset it in maintenance menu.
    thks
    Din

    be calm & patience.

  • Din Noor

    August 26, 2008 at 1:31 am in reply to: DVW-M2000 Digibeta Deck

    hI there,
    have you check on the tape itself?
    did you Press in the red record inhibit plug. (“ON”)
    Return this plug to its original position to enable recording on the
    tape again. (“OFF”)..

    thks
    Din

    be calm & patience.

  • Din Noor

    April 21, 2008 at 5:29 am in reply to: ESAM control

    Hi Ty Ford,
    thks for your post..

    – Basically we are planning to use it in a linear editing facility (TC IN/OUT).
    – We are trying to find a compact flash recorder that has RAM scrub” and “RAM repeat” with 1 ms accuracy for precision cueing with advanced jog/shuttle techniques..
    – we will like to patch the field recorder with the SONY DIGI-BETA VTR recorder which will control the field recorder.
    -As for presence system pls ignore.
    Fostex field recorders are capable, but it is not CF card..(fostex PD-606 9PIN Remote D-SUB 9pin, Protocol: Sony 9pin (P2)
    thank you..hope to hear from you soon..

    Rgds:
    Din

  • Din Noor

    April 12, 2008 at 4:35 am in reply to: BETA SP PVW2800

    Hi Greg,
    thks for you reply, i have found out the fault..is the audio card AU148 in the PVW that has some component issues.Thks by the way.

    Din

    be calm & patience.

Page 2 of 2

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy