Replies – Forums – Dave Jenkins – Page 32

Forum Replies Created

Page 32 of 57

← 1 … 31 32 33 … 57 →

Dave Jenkins
June 7, 2008 at 6:16 pm in reply to: Redigitizing XDCAM-HD

[Eric Temple] ” these disks were loaded using the file-import-xdcam method, it won’t work.”

Why doesn’t it work? If you transfer the clips the same way you did it the first time (Sony Transfer software) and put them in the same location (don’t import into FCP) it will bring the project back just like you last had it. We have done this and it works fine. Did use bring the clips in completely or did you trim the clips in the transfer software?

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 27, 2008 at 4:29 am in reply to: XDCAM disc image not appearing on desktop

We are on 10.5.2 and are not having this problem. We did a clean install of 10.5 and are using the 2.51 and the 2.70 version of the transfer software. We are having the duplicate clip problem though.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 23, 2008 at 12:59 am in reply to: Preview Boris Text Output

No viewing over video until it’s in the timeline. Hard to get used to if you come from a system like Media 100.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 22, 2008 at 5:08 am in reply to: To leopard or not to leopard that is the question

Leopard seems good for me so far. Fresh install and Compressor screams for me too!

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 21, 2008 at 8:59 pm in reply to: XDCAM Transfer 2.7 Still double clips

Really, this was fixed in 6.03? Hmm, to be able import XDAM into FCP or use Livetype with backgrounds on Leopard. Tough choice.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 21, 2008 at 4:13 am in reply to: Located problem: Livetype problems with K3

Nice job figuring this out!

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 20, 2008 at 4:05 pm in reply to: XDCAM Transfer 2.7 Still double clips

No, this was a known issue in 2.51, I was hoping it was fixed in 2.7.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 19, 2008 at 12:41 am in reply to: XDCAM Transfer 2.7 still not showing all clips

Craig, where did you find this install info? I looked through the read me, Notes & Limitations and manual and this is all it said.

Installation
The XDCAM Transfer software is distributed as a standard Mac OS X installer package (“XDCAM Transfer 2.7”). To start the installation, just double-click this package in the Finder.
Follow the instructions to complete the installation. You will be prompted to restart your Mac at the end in order for the FAM driver software components to be activated.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 18, 2008 at 3:27 pm in reply to: Damaged TV and aged Video effect plug-ins needed, or how to!!!!

CGM has these effects.

https://www.cgm-online.com/eiperle/cgm_e.html

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4
Dave Jenkins
May 16, 2008 at 3:44 am in reply to: XDCAM Transfer Tool 2.70 for Mac is out

Release notes:

https://servicesplus.us.sony.biz/sony-software-model-PDZKP1.aspx

Readme

PDZ-KP1 XDCAM Transfer version 2.7

This version of XDCAM Transfer features the following:

1. Adds support for the new XDCAM HD 422 products which record using 50 Mbps MPEG-2

PDW-HD1500 XDCAM HD 422 Deck
PDW-700 XDCAM HD 422 Camcorder

Note: Although this version can be used with older versions of Final Cut Pro, you must
use Final Cut Pro version 6.03 to in order for XDCAM Transfer to recognize the 50 Mbps
HD content recorded on the disc (and to edit the material).

2. Qualified for use on both Tiger and Leopard (Mac OS X version 10.4.11 or later)

3. Continues to supports the use of the following products with Final Cut Pro as before:

PMW-EX XDCAM EX Camcorder (Requires Final Cut Pro version 6.02)
PDW-U1 USB 2.0 XDCAM Drive (Requires Mac OS X 10.4.11 or higher)

4. This version also installs the Leopard qualified FAM driver for the optical XDCAM products:

Standard Definition XDCAM Camcorders and Decks
PDW-530
PDW-510
PDW-V1
PDW-1500
PDW-R1
PDW-D1

XDCAM HD Camcorders and Decks

PDW-F330L
PDW-F350L
PDW-F335L
PDW-F355L

PDW-F70
PDW-F30
PDW-F75

XDCAM HD 422 Camcorders and Decks

PDW-700

PDW-HD1500

5. Bug Fix: This version enables XDCAM EX clips which were shot with timecode mode set to CLOCK to be recognized
and imported into Final Cut Pro. In previous versions, XDCAM Transfer would display the error message:
“Error There is no timecode calculator in timecode track builder”.

Dajen Productions
Santa Barbara, CA
Mac Pro 2.8 Octo – AJA Kona LHe
Huge 1.2 Raid
FCP 6.0.2-OS X 10.5.2-QT 7.4

Page 32 of 57

← 1 … 31 32 33 … 57 →