[Chad Muska]

Anyone any idea?

[Chad Muska]

Thank you very much Mike! Works like a charm now!

[Chad Muska]

I used the AC-3 Pro codec, but am having said problems with the low volume…

[Chad Muska]

Thanks for your help John!

But why is my AC-3 Pro audiostream’s volume getting very low once it’s imported into DVDA?

The rendered file out of Vegas has the same volume as the original wav file it’s rendered from.

I’m using the default template (Audio: 192 Kbps; 48.000 Hz; 24 Bit; Stereo; AC3) and only customize the dialog normalization from -27 dB (default) to -1 dB.

Any idea why this keeps happening?

I don’t have that problem with AC-3 Studio and a DVD.

[Chad Muska]

>Also, If I sync the beginning of the song and then stretch or shrink >the track so that it syncs at the end of the song does that mean that >everything in between should also be in sync?

Yes.

[Chad Muska]

Thanks for your help John!

In TotalMedia Theatre I get an error message that says:

“This CD/DVD can’t be played back.”

In Power DVD 10 I get.

“This disc format is not supported.”

Nothing plays back.

If I manually open the mts file there’s no audio, but the video works (Windows Media Player 11). I get audio and

video with VLC Media Player, Power DVD 10 and TotalMedia Theatre, but no menu though.

Alright, I just found out something:

If I mount the image and then go to the virtual drive and drag and drop both folders (BDMV & CERTIFICATE) into a

new folder on my Desktop it plays back just fine with ArcSoft TotalMedia Theatre 5.0.1.87 (even the menu works

fine).

So that means that there’s something wrong with the mounting process I guess?
But why does my other Blu-Ray (mainconcept mpeg-2, full hd @ 24fps progressive w/ PCM audio) project play back just

fine in Total MediaTheatre when it’s mounted with Daemon Tools?

Anyway: Is there a guarantee that it’ll play fine on a blu-ray player, because it plays fine on TotalMedia Theatre?

I had no errors during the prepare process of the iso file from DVDA, thus I guess it should be fine, right?

I heard that Power DVD is based on the software of DVD/Blu-Ray players, so if it doesn’t work on there it won’t

work on a DVD/Blu-Ray player, is that correct?

Is there a way to test a Blu-Ray authored with DVDA if it’ll work on a Blu-Ray player without actually burning it

to Blu-Ray and testing the burned Blu-Ray on the Blu-Ray player? I actually don’t have any way to play back or burn

a Blu-Ray (physicially).

Is there a way to play back a BDMV folder structure with Power DVD 10 and actually see the menu?

Since my movie is only 34m long, can I just burn it to a DVD and play that in a blu-ray player just fine (I know it

won’t work in a DVD player)? I mean Blu-Ray discs aren’t that cheap and it would be quite a waste of space to burn

4GB on a 25GB Blu-Ray- I can’t afford to have that.

[Chad Muska]

I’ve rendered numerous test video samples and came to the followung results:

Instead of rendering the entire 34minute movie I’ve tried to render only 10 minutes and the problem from above

appears with that 10min clip already (I can’t play the resulting iso file from DVDA).

I only used the “Blu-ray 1920×1080-50i, 16 Mbps video stream” template for those test video samples.

It works with the “Blu-ray 1920×1080-50i, 10 Mbps video stream” template though.

I’ve tried to render to 15 Mbps and 14Mbps and it still didn’t work.

This is all with the SONY AVC codec suggested by John.

As I previously said I’ve had successfully authored a 1h24m movie with PCM audio and a cbr of 17Mbps with the

MainConcept MPEG-2 codec and the “Blu-ray 1920×1080-24p” template in Vegas.

I tried to do the same with my current movie (which was filmed with the same camera/settings), but it’s not

working.

Any idea what might be the problem here?

[Chad Muska]

Thanks for your input John!

I did exactly what you suggested and it didn’t work.

I didn’t change any settings in the Sony Vegas template at all and opened the according Blu-Ray project in Sony DVD Architect. Menu based, AVC 1920×1080-50i, 16:9 with AC-3 Stereo sound.

Here’s a screenshot of my render properties in Vegas:
https://img153.imageshack.us/img153/2815/clipboard02bz.jpg

Here’s a screenshot of the project properties in DVDA: https://img822.imageshack.us/img822/7382/clipboard01ub.jpg
(audio bitrate is 192kbps)

The weird thing is that if I export a short clip of 3 minutes it works without any problems, but when I try to export the whole 34 minutes it’s not working.

As I already said I’m mounting the resulting iso file with Daemon Tools and play it back with ArcSoft TotalMedia Theatre 5.0.1.86 and Power DVD 10, neither works though.

Maybe it’s because of my project properties in Sony Vegas:
https://img412.imageshack.us/img412/8641/clipboard03es.jpg

[Chad Muska]

That’s just sad 🙁

[Chad Muska]

Have you heard back from them on the current status of solving this problem?