Bobby Mosaedi
Forum Replies Created
-
what is nucleo?
-
i have an x800xt card for my mac and it renders really fast but looks pretty bad. i too want to get a hi-fidelity supported card but want to know for sure if it will create the same quality looking renders as sofware.
-
sorry, what i meant to say was im using RAID admin version 1.5 but using the older firmware specifically for the controllers.
-
oh ok, i got it… i never replaced 1.5 with 1.3. just did the firmware update. everythigns seems to be going a-Ok now with the acquire, been able to go 10 minutes without any hiccups, so thank you
-
thanks floh,
i bought the LSI logic card from apple with apple packaging and it also came with cables. i cannot acquire more than 25 seconds of video without the system telling me recording difficulties in 8bit or 10bit. i will try the downgrade now. will it also downgrade the RAID admin application? -
OK, back to the basics… i put the media100 HDX card on lot 1 and 2 in the G5 and the fibre channel card in slot three. that got rid of the glitching and crashing… still working on the real-time playback
-
ergh. now back to striped RAID. the weird thing is, i can scrub back and forth quite quickly on an 8 second clip, but when i push spacebar to play timeline or clip, it will stutter like it ran out of buffer and then crashes… not failing the media100 hd test either.
gosh this is reallly frustrating. after spending all this money. media100, my my my. i still have a convergent design box sitting here collecting dust that media100 fails to work with, and now i cannot get these drives to work. sheesh. this used to happen with the older media 100s and scsi drives back in the 3.0 days.
-
i deleted the raid from software utility and redid it again as concatenated set. still crashes. the error message im getting is the unrecoverable dialog, -19111, bla bla bla i need to tell this to media 100 tomorrow. gosh this is so frustrating.
-
i myself do not use audio scrubbing much at all, but we do have an editor here that cannot live without it, and it does happen. it will freeze with the spinning color wheel and never comes back to life, we’ve even let it spin for a couple hours once. nothing. it makes me wonder if there may be a problem with my computer or analog board
-
under the “performance” menu in the “settings” menu, i have controller write cach turned on, host cache flushing,, and drive write caching. steady streaming mode is not checked. and the read prefetch is set to 8 stripes (512 KB/disk)