Replies – Forums – Berry Blanton

Forum Replies Created

Berry Blanton
February 10, 2006 at 2:58 pm in reply to: 1200A Error E-00 Servo Not Locked

The Symphony Nitris does support 720, but we ARE upconverting to 1080 for this project. The problem was the output (upconvert) setting on the deck wasn’t set yet (to 1080) and we were trying to bring it in to a 1080 project. Once that was set, and the Input was disconnected we were good to go. Thanks.
Berry Blanton
February 10, 2006 at 2:50 pm in reply to: 1200A Error E-00 Servo Not Locked

The Symphony Nitris does support 720 (however, it looks really bad…Avid is working on it…we just got an upgrade yesterday that doesn’t quite seem to do it), but we ARE upconverting to 1080 for this project. The problem was the output (upconvert) setting on the deck wasn’t set yet (to 1080) and we were trying to bring it in to a 1080 project. Once that was set, and the Input was disconnected we were good to go. Thanks.
Berry Blanton
February 9, 2006 at 7:49 pm in reply to: 1200A Error E-00 Servo Not Locked

Ya…Feedback is right. We didn’t have a reference hooked up…could that be an issue? Its working great without the HD-SDI in from the Nitris…we’ll see if the reference helps.

Thanks.
Berry Blanton
February 9, 2006 at 7:05 pm in reply to: 1200A Error E-00 Servo Not Locked

Wow…ok…so. Not using Firewire (but have the card installed).

Here’s the configuration:

HD-SDI IN: From Symphony Nitris

HD-SDI 1 OUT: To LH1700
HD-SDI 2 OUT: To Symphony Nitris

I just went over and disconnected the HD-SDI IN from the Nitris and bam…the picture is back on the LH1700.

But this brings me to my next question…which is really my original problem. I’m getting a really wierd image in the capture window of the Nitris. Now, after disconnecting the IN, there isn’t even an image in the Nitris.

Any thoughts with this new info?

Thanks for the quick reply!!
Berry Blanton
January 23, 2006 at 3:44 pm in reply to: Camera to 1200a Firewire Dub

“could clear your P2Cards and reload them with the P2Store’s footage for the transfer to the 1200. ??”

I understand that the P2Store is USB, but I’m wondering if you can move footage back to the Card from the P2Store inorder to transfer it from the card in the camera to the deck. So…it will still be camera to deck.

Thanks
Berry Blanton
January 19, 2006 at 4:06 pm in reply to: Camera to 1200a Firewire Dub

Interesting…that leads me to: can you dump footage from the P2Store BACK to P2 Cards? In that case you could clear your P2Cards and reload them with the P2Store’s footage for the transfer to the 1200. ??
Berry Blanton
January 18, 2006 at 8:39 pm in reply to: Camera to 1200a Firewire Dub

Thanks. Is this something you’ve tried? I’m also wondering the process for doing this after its been transferred to the P2Store. We won’t get our cameras two weeks or so and need to start preparing for these issues.

Thanks again.
Berry Blanton
October 31, 2005 at 2:46 pm in reply to: Cutting movie shot on varicam at 720p24….need serious help.

Just use firewire. The only thing you did wrong was select the wrong capture preset.

RE: Simon