[Bernardo]

Thanks Lance.

But i’m already doing it …

[Bernardo]

try http://www.debugmode.com

[Bernardo]

Hi.

Debug Frameserver will do what you want.
Avi-reference , not quicktime reference.
it’s a plugin for premiere and it’s free!!

https://www.debugmode.com/frameserver/

have a try!

cheers
Bernardo

[Bernardo]

Thanks Aanarav.

[Bernardo]

HI GUYS, LET’S MAKE THIS WORK!
I HAVE NO MONEY TO BUY ANOTHER CARD!!!

Unfortunally I DON’T have a real stable Decklink Windows system…

But I did start with the post:
DL Extreme PCIe – Premiere Serious Error II – HELP!
And I could never imagine there are so many users with the same instability problem on PPRo…

My system still not stable with yuv 10bit BMD codec.
I’m trying to work with the video rendering set to none.

The 5.3.1 driver it’s failling everytime I try to install it.
I’m working with 5.3 now..

I’m running DL Extreme PCIe with Premiere Pro on a
certified Blackmagic System:
INTEL PENTIUM DUAL CORE
Asus P5WD2 Premium
Intel Pentium D Dual Core 830
3 SATA disks with 8MB cache using onboard RAID
nVidia GeForce NX6600
4GB DDR2 800 RAM (CORSAIR TWIN2X2048-6400PRO)
535 watt Power supply (24 pin) – Enermax

I WILL LET YOU KNOW HOW THINGS ARE GOING!

AGAIN! LET’S MAKE THIS WORK!

REGARDS

BERNARDO
Rio de janeiro – Brasil

[Bernardo]

Geoff thanks. and Happy christmas!

i’m going to do that way.

but this MOBO has only 1 “short-lane PCIe” slot…the other 2 slots are bigger and I guess it will not fit the DL card (those slotts are too big for it)

anyway thanks again.

Bernardo
Rio de Janeiro

[Bernardo]

sorry, power supplt it’s 540 watts.

GOLF GUY wrote:

Had basically the same problem. What I did was start from stratch. I reinstalled Windows, but did not install SP2. Updated the bios with version 606. Downloaded the latest drivers for the video card. Downloaded Decklink’s 5.2.2 driver. Did a standard bios setup, except with the memory, for some reason ASUS does not recognize my Corsair memory as PC6400 (had to manually set that)and then loaded Adobe, Decklink and other needed software. The system has been pretty stable for the past three days. We do a ton of editing for our syndicated show, so maybe we have solved the problem. I did notice that there are certain DV files (codecs) that Decklink absolutely will not work with, so we try to avoid inserting those into a project.

My system is as follows:

ASUS P5WD2 Premium
Intel Pentium D Dual Core 830
4 250gig SATA disks with 16MB cache (3 in RAID 0 Config.)
1 80gig SATA
1 120gig 133 PATA (system)
evga nVidia GeForce 6600GT 128
2GB DDR2 800 RAM CORSAIR
Antec case with 480 watt Power supply
Decklink card installed in PCI slot 2

well, that’s what i’m going to try!

[Bernardo]

thank you very much Golf.
I will do the same.

one doubt:

Blackmagic needs Windows XP with SP2 or not?

the motherboard will only install all drivers if we have at least SP1.
so i’m not quite sure about not installing the SP2.

Do you think that the WINXP SP2 has something to do with that problem?

2 more questions:
how to manually set the memory to PC6400?
I did download the 606 Bios update, but how to update the BIOS?

thanks again.
Bernardo

[Bernardo]

thanks Andrew.
So, do I have some loss capturing via firewire ?
My image gets better capturing via SDI or Component?
Sorry man, I didn’t get…It should be the same..the both ways, shouldn’t?

I only have firewire decks…

thanks again
Bernardo

[Bernardo]

Thanks for your reply!

“For all we know, the Premiere DV decoder (made by MainConcept I believe) could work differently.”
-so the premiere encoder differently better or worst?
(sorry but i still confused, and that’s a very important issue for a finish process)

thanks again
Bernardo