Forum Replies Created

Page 1 of 3
1 2 3

  • Andy Hutchinson

    July 16, 2005 at 11:28 pm in reply to: Unable to capture DV

    The original tape has 13 minutes of recording on it. There are at least 20+ areas of loss audio that range from 1-3 seconds. It starts almost immediately on the tape and continues through out. There were no problems on previous or following tapes. I just couldn’t understand why dubbing through the firewire cable and creating new TC didn’t get rid of the issue with the DSR-20 stopping the capture process. I think I mentioned that it stopped with the logging or just capturing on the fly.

    Maybe I will take it in and have it professionally cleaned.

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    July 10, 2005 at 11:36 pm in reply to: need picture frames

    I am not that artistic and was looking for different frames already made. Some wood, some gold, designed frames, etc.

    I have seen some in programs like PhotoSuite (I think) where you import your digital stills and place them in different digital frames and print them out. I am going to use these in FCP and place video in them.

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    June 1, 2005 at 8:41 pm in reply to: FCP5 Multicam Edit Question

    FCP1,089

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    June 1, 2005 at 8:36 pm in reply to: turn audio wave form on / off in timeline as needed

    This may be a record for me. Go to the Video Transition and open Iris/Oval iris. Drop this transition on your edit point. Double click the transition on the timeline and a window opens. Click on Feather and use the Border slider to set the amount of feathering you want on the iris transition.

    Is this what you are looking for?

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    June 1, 2005 at 8:22 pm in reply to: turn audio wave form on / off in timeline as needed

    Ange you are pushing me to the max now! Let me check.

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    June 1, 2005 at 8:04 pm in reply to: turn audio wave form on / off in timeline as needed

    I think I can finally answer someone’s question. Option-Apple-W

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    May 29, 2005 at 2:20 am in reply to: Sorry to post twice but I need some help on this

    The two audio tracks didn’t show up at any setting on the timeline or in the Viewer until I deleted all of the waveform files in Final Cut Pro Documents. I guess it was getting bogged down refreshing the screen.

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    May 29, 2005 at 2:16 am in reply to: slides into FCP

    Peter I was just reading the PS7 image information. Costco said they scan at a minimum of 300 dpi. Beats me. I know it just looks pretty good how ever they scan it.

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    May 28, 2005 at 10:51 pm in reply to: slides into FCP

    Pete here is one of the scanned slides. PS7 says this about the image:

    Pixel dimensions 1818W x 1228H, Document size 25.5 Inches wide x 17.056 Inches high and resolution 72 pixels/inch.

    Scanned at Costco and 29 cents worth.

    Let me know.

    https://www.videomagiconline.com/FH000067.jpg

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

  • Andy Hutchinson

    May 28, 2005 at 9:36 pm in reply to: Sorry to post twice but I need some help on this

    I have waveforms!! Still wondering about the housekeeping. Thanks

    Andy Hutchinson
    Video Magic
    Winter Park, Fl

    OS-10.3.7, FCP4.5, SP 2.05, Dual 2.5 G5, 2 gigs RAM; Sys HD 200G : WD 200G 7200rpm with 8 Meg buffer; 2 WD 250G 7200 rpm with 8 Meg buffer FW enclosure; Lacie FW800 card; Maxtor 120G FW for storage, 1 WD,

Page 1 of 3
1 2 3

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy