Replies – Forums – Andre Welkin

Forum Replies Created

Andre Welkin
May 12, 2011 at 10:34 am in reply to: Solved RS-422 problem with decklink studio card

Hi there i have the same problem, i have a Decklink Extreme 3d and my RS422 also does not want to work. Please can i ask if you can mail me a diagram as to what you mean cross wire and change Pin 2 and 8 around. here is my mail address andrecwelkin@yahoo.com.

Many Thanx Andre
Andre Welkin
April 20, 2011 at 8:23 am in reply to: MPeg Streamclip compression to DVCPro50 NTSC

Hi there

If there is any one that can answer my post please it will be very much appreciated.

i get lines on my video after i use mpeg stream clip to convert NTSC to pal.

Best Regards Andre
Andre Welkin
April 8, 2011 at 1:30 pm in reply to: Need to improve Compressor 2 output quality

Hi there

I am also having this problem, as i export at a 2 pas vbr best using FCP7, at the end my video has blocks on it andthis does not happen on all the scenes it is different all time, this is after every new export. i use 6.0 and 7.0 bottom first 16 video.

Any advise will be appreciated
Andre Welkin
March 24, 2011 at 12:04 pm in reply to: MPeg Streamclip compression to DVCPro50 NTSC

HI TEHRE

IT SEEMS YOU KNOW YOUR WAY AROUND MPEG STREAM CLIP. I USE IT AS WELL AND WROKS LIKE A BOMB, THE ONLY THING NOW IS THAT THE VIDEO GEST CONVERTED FROM NTSC TO PAL, THERE ARE LINE ON MY VIDEO MOSTLY NTHE SOLID COLOURS. ANY SUGGESTIONS TO WHAT THAT COULD BE, ALSO IF THERE IS ANY OTHER SOFTWARE THAT CAN HELP ME CONVERT BETWEEN NTSC AND PAL PLEASE TELL ME IT WILL DO THE WORLD OF GOOD FOR ME.

TX ANDRE
Andre Welkin
January 31, 2011 at 12:02 pm in reply to: HDW1800

Good Day Michael G

Please can i ask for some advise regarding the SONY HDW 1800, we have just purchased one and i am having a hard time with it. It keeps kicking out the tape one we insert it, please advise if you can because i am pulling my hair out.
Andre Welkin
October 19, 2010 at 7:48 am in reply to: Dolby E

Hi there Jerry

Thank you for the response.

The client is supplying a Blu_ray music video that they would like to transfer to HDCAM this is for a TV station that requires HDCAM with Dolby E on it. this is the only specs the except. I would like to ask what is the way for me to get this done and make sure that the project goes out correctly.

Best Regards Andre
Andre Welkin
October 18, 2010 at 8:59 am in reply to: Dolby E

Hi there Jerry my name is Andre Welkin, i find that your response is so effective. I am new at this HDCAM vs Blu-Ray things, this is where the company is heading so i have to get up to speed with it.

Can i ask for advise from start to end on Capturing from Blu_Ray into FCP, and also how do i get all the cahhnels back onto HDCAM including the Dolby E channel.

Does this mean i can print all this to DHCAM from FCP,

Many thanks in Advance