Forum Replies Created

Page 63 of 150
  • Aanarav Sareen

    May 10, 2006 at 8:20 pm in reply to: premiere pro audio filters to remove noise

    To get rid of minor hum/hiss, use the DeHummer plugin. However, this will work on only minor hums. If you have a lot of noise, then Adobe Audition should be the tool of choice.

  • Aanarav Sareen

    May 10, 2006 at 7:30 pm in reply to: building an axio LE / RTX2 system

    Hi Mark,
    Are you planning on building this yourself? If so, I would advice against it. We just put up an Axio system and tried to build it from scratch. There were too many hardware conflicts and we ended up getting a system from one of the Matrox dealers. Works perfectly!

    Aanarav Sareen
    premiere@asvideoproductions.com

  • First off…Its GPU accelerated playback and rendering I have run numerous tests to see if this works and it does. Infact, Steven ran a few tests while we were on the phone and he will give you the same answer that I did.

    [BogeyB] “Another issue: Even if the GPU accelleration is activated there is always the red “needs to be rendered”-bar above the timeline.”

    GPU accelerated playback does not mean that you do not have to render. You have to render whether the option is turned on or not.

    [BogeyB] “Has anyone an idea how to configure the System/Drivers/PPro 2 to know the true promise of GPU accellerated rendering???”

    I have the 6800GO (mobile version) and it works on my end. Can you run a few tests and provide us with test results, in terms of time taken when GPU Accelerated Playback is activated and when it’s de-activated?

    Aanarav Sareen
    premiere@asvideoproductions.com

  • Aanarav Sareen

    May 8, 2006 at 11:20 pm in reply to: Laptop 5400rpm drive

    Nothing less than 7200rpm will work. Also, you are pushing your limits by using just an internal HDD.

    Aanarav Sareen
    premiere@asvideoproductions.com

  • Aanarav Sareen

    May 7, 2006 at 6:01 pm in reply to: Archiving Project files

    Use the collect files feature in After Effects. File > Collect Files.

    Aanarav Sareen
    premiere@asvideoproductions.com

  • Aanarav Sareen

    May 7, 2006 at 6:01 am in reply to: Black transition = Still?

    Hey Joe,
    How’s it going? Anyway, couldn’t the problem be that he is exporting the video as WMV?

    Aanarav Sareen
    premiere@asvideoproductions.com

  • Aanarav Sareen

    May 7, 2006 at 6:00 am in reply to: Optimize Stills?

    So, you exported the file as a WMV from Vegas? If so, wrong move. You should have exported the file as an AVI or MPEG2. Encore versions 1.x don’t like anything other than that. Also, the optimizing stills is a feature of Premiere Pro, where well…the stills are optimized for quality and motion. I am not sure if Vegas has the same feature.

    Aanarav Sareen
    premiere@asvideoproductions.com

  • 1) Premiere Pro does not work with a highly compressed formats such as MPEG. I would reccomend converting your files to DV-AVI.
    2) Explained by problem # 1.

    There are a few apps that can convert MPEG files to DV-AVI. I personally reccomend DVD2AVI.

    Aanarav Sareen
    premiere@asvideoproductions.com

  • [itallfades] “Is this because I used an AV-USB converter to get my HI-8 footage?”

    The USB convertor is the problem. Premiere Pro does not support captures via a USB interface.

    I would strongly reccomend that you watch Steven’s tutorials on Lynda.com or even pick up a good book on Premiere. Also, you cannot apply transitions to clips as is. You need to trim down the head and tail of the clips and then apply transitions.

    Aanarav Sareen
    premiere@asvideoproductions.com

  • Aanarav Sareen

    May 6, 2006 at 7:35 pm in reply to: 45 seconds to save in PP2

    1 minute to open is OK. The save duration is a little long. Are your drives full by any chance? Is the drive defragmented? Is the drive 7200rpm?

    Aanarav Sareen
    premiere@asvideoproductions.com

Page 63 of 150

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy