-
45 seconds to save in PP2
Hi,
I am working on a project with about 3 hours of DV video. There are no pictures and all the media is on its’ own drive. Premiere Pro 2 takes about 45 seconds to save and about 1 minute to open the project. These seems way too long, can I clean it up in any way to speed it up?
I have XP SP2, Intel P4 2GH, 1GB DDR.
Thanks for any help,
Stephen
-
4 Replies
-
1 minute to open is OK. The save duration is a little long. Are your drives full by any chance? Is the drive defragmented? Is the drive 7200rpm?
Aanarav Sareen
premiere@asvideoproductions.com -
I would have thought this speed to be good for a 2Ghz machine with that much video.
Redgum Television Productions
Broadcast & Corporate Documentaries
Brisbane, Australia -
A three-hour timeline is pretty beefy. I would say that I wouldn’t find this to be unusual on that machine.
-
Thank you all for your replies.
The drives are not full and were defragmented prior to capturing. They are all 7200RPM. The timeline is only 1 hour (with 3 hours of source material) but it is also a multi-cam timeline.
It just seems like it has gotten slower and slower and I have not done too much more; a few edits here and there but it seemed like it used to go much faster even with this same project…
Thanks again,
-Stephen
Reply to this Discussion! Login or Sign Up