Replies – Forums – Ty Ford – Page 36

Forum Replies Created

Page 36 of 422

← 1 … 35 36 37 … 422 →

Ty Ford
October 19, 2018 at 1:40 pm in reply to: Trouble with HDMI Buzz!

Hmm, OK, then my next guess is that one of your power supplies is “dirty.”

Try the process of elimination to see if you can figure out which one.

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 18, 2018 at 9:48 pm in reply to: Trouble with HDMI Buzz!

Hello Jonathan and welcome to the Cow Audio Forum.

Sounds like a ground loop, maybe. What happens when you plug in all AC powered devices into the same strip?

Regards,

Ty Ford

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 16, 2018 at 9:51 pm in reply to: Tascam DR70D Recording 2 Stereo Files

Hello Reg and welcome to the Cow Audio Forum.

That’s a bit too deep in menus for me.

TASCAM doesn’t have a support group for the D70.

Have you tried them directly? I have in the past and they were very supportive.

https://tascam.com/us/support/contact/product/tascam

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 16, 2018 at 12:30 am in reply to: Wireless from a mixer to the camera

Clyde,

that voltage from xmitter to mixer, prolly not a problem.

do it with the fader down and then bring it up a little and see.

Better yet, get a line to mic 40 dB pad and stick it in there.

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 15, 2018 at 11:11 pm in reply to: Wireless from a mixer to the camera

Clyde,

You’re in Manila? Do you practice Ho’oponopono?

Now on to other things.

Bias Voltage is a 2-5 voltage used to power some electret condenser mics. It is NOT Phantom Power. Phantom Power is for externally polarized mics. You can not run a phantom powered mic with bias voltage. This is for your general information here.

Hard to say if your plan will work, but the only way to test is to try. Does the mic with the M9 have a TRS or a TS plug? If it has a TRS plug that MAY indicate that the transmitter is expecting a balanced input. It does not GUARANTEE that, however. You may have to fiddle around with the connections. It used to be that on a G3 Sennheiser tip and ground were for mic and ring to ground were for line level. (or vice versa). I never had to deal with the issue, but you may have to in figuring out the best input plan.

If the M9 mic has a TS plug then audio to tip and ground to sleeve should work.

Any questions?

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 15, 2018 at 3:09 pm in reply to: Wireless from a mixer to the camera

Hello Clyde,

Can you provide a list of gear by model number and the oder in which you want to connect them?

You have a mixer feeding a transmitter? Where is the lav plugged in and does it require phantom or just bias voltage?

What are you doing with the receiver?

What are you trying to do?

Thanks,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 12, 2018 at 8:33 pm in reply to: Question to shooters: earbuds etc.

Thanks, Nick.

My point is that I’m guessing that there ARE buds out there that will do the job. They might be more expensive, but so far, I’m hearing from sound guys about options. I thought it would be good to pass that info around.

Your Pal,

Ty Ford
Cow Audio Forum Leader (Thanks to Nick, Griffin)

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 12, 2018 at 1:39 pm in reply to: Can podcasters using Logic share their workflow?

Hi Noam,

Wow! You get an award for thinking outside the box! I’m only ankle deep in Logic. Maybe ask on a Logic forum.

https://www.logicprohelp.com/forum/

https://discussions.apple.com/community/professional_applications/logic_pro

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 9, 2018 at 11:36 pm in reply to: What filters/EQ’ing might you recommend for a recorded telephone call?

Hello Noam,

I use RX7 Advanced noise reduction followed by (or sometimes preceded by) an 7 band EQ. Following that I’ll compress or limit to scrunch the remains together. Occasionally, the de-reverb will help by removing some early reflections.

My approach is to remove the bad stuff and squeeze what’s left.

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog
Ty Ford
October 9, 2018 at 9:01 pm in reply to: Zoom H1n Skipping Real Time Audio When Recording

Hello Devin and welcome to the Cow Audio Forum.

Was this a new and newly formatted SD card?

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford\’s Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford\’s Blog

Page 36 of 422

← 1 … 35 36 37 … 422 →