Replies – Forums – Swen Linde

Forum Replies Created

Swen Linde
May 9, 2016 at 8:30 pm in reply to: DCI-P3 Measurement RCM vs. ACES

Thank you Rick & Chris. I know that there are a lot of problems with aces. In fact i like the behavior of aces in a creative way. With Resolve CM things work better in a technical way but i am not used to work with it right know. I understand your point. Using the P3 Gamut with a different white point does makes sense to me, but doesn’t fit our Christy projector at the moment. Actually we are calibrated for P3 DCI and REC709. We are currently investigating to work on P3 D60/65 on our projector but that needs a bit of extra time and recalibration. All our Monitors Dolby and Sony X-300 are P3 DCI capable. So this should not be a problem for us. We had a chat with Omnitek today. It seems that there is a setting in our OTR 1001 to measure DCI P3 accurate. Hope that works after the suggested software update.

Best regards
Swen
Swen Linde
April 7, 2014 at 7:40 am in reply to: Geforce Titan | Differences

We use Cubix Expanders so that would not be a problem, I think. Our second resolve is running on 2 titans without any issues, but evga is the vendor as i mentioned.
So I´ll buy to gigabytes.

Best
Swen
Swen Linde
April 7, 2014 at 7:10 am in reply to: Geforce Titan | Differences

Thanks Margus. Are you working on a Mac? I guess yes.

Best regards
Swen
Swen Linde
September 27, 2012 at 1:48 pm in reply to: AAF Conform Problems

Hi Rohit hi Craig,

the aaf is working now. The editorial did not commit the multicams and I forgot to check this. Thanks Craig. Rohit i will send the aaf to the davinci support. It´s conforming but has a lot of error messages as mentioned before. “Non-File SourceMob is detected and ignored”.

It will be interessting to hear what this is saying us.

Thanks for your help.

With best regards
Swen
Swen Linde
September 27, 2012 at 12:23 pm in reply to: AAF Conform Problems

Thanks Craig, for oyur quick response.
The Footage is Alexa Log-C and the Reel ID will be taken from the embedded one in the Source Clip. I will check if the Multi Cams are committed.

Thanks
Swen
Swen Linde
March 18, 2011 at 1:51 pm in reply to: Multiple NVIDIa Quadro 4000’s.

We are using two 4000´s with pcie extension. The increase of performance is worth it to spent money for a second card.

Swen
Swen Linde
February 20, 2011 at 9:08 pm in reply to: Re_Confrom Question

Good question, thanks Gabrielle

Hopefully someone have a solution.
Otherwise this should be a request for upcoming Updates.

Best
Swen

WeFadeToGrey GmbH, Germany
Swen Linde
February 18, 2011 at 12:18 pm in reply to: Speed

Hello Peter,

the config, was they way BM recomended. I think there is no guide, how to connect the cubix.
After installing another quadro 4000, it´s working smooth again.
I installed the 2 400´s in slot 1 and 2. Red Rocket is in slot 3.

Works perfect.

Thanks
Swen