Replies – Forums – Sven Giebel – Page 2

Forum Replies Created

Page 2 of 2

← 1 2

Sven Giebel
March 8, 2009 at 10:59 pm in reply to: Embedded AES signals from Kona LHe. Channels are missing

We have a KBox attached to the card.
Sven Giebel
March 8, 2009 at 7:30 pm in reply to: Embedded AES signals from Kona LHe. Channels are missing

Thanks Jeremy,
yes, everything is set up properly.

Sven
Sven Giebel
August 25, 2008 at 7:41 am in reply to: Cannot capture with 6.0

Installing version 6.0 changed a tiny little setting inside the capture settings:

Before deinstalling und reinstalling the 6.0 software I took a closer look at the Audio/Videosettings of my Easy Setups. Under the tab “capture” there are the Quicktime video and audiosettings. There is a button in the lower right corner of the Quicktimevideosettings called “advanced” or “more” or “options” (I have the german version). In the following window is the tab “videoinput”. Here the size of the incoming videosignal was changed from 625i25 to 720p50 in all my Easy Setups.

Thank you for your help!
Sven
Sven Giebel
August 23, 2008 at 11:17 am in reply to: Cannot capture with 6.0

—“or you have your input set to a secondary format in the control panel.”
Thank you Jeremy, I can exclude this but maybe you are right concerning the setup.
After installing version 6.0 I restored my FCP prefs with FCP Rescue 6. So I used exactly the same easy setups as before. I tried my Pal DVCPro50 setup and also tried capturing with a ProRes-setup. None of them worked. But maybe here’s the culprit.
From the release notes (I eventually read):
Also, please note that Easy Setups from earlier versions may not work properly in Final Cut
Studio 2 (FCP 6).

Hm, I’ll have to check this on monday. I will deinstall the driver, reinstall it and this time I will use the new FCP prefs.
I will make a easy setup from scratch.

So far, thank you very much for your help folks!
Sven
Sven Giebel
August 22, 2008 at 6:44 pm in reply to: Cannot capture with 6.0

Aah, thank you Jeremy

I’ll have to check that. I didn’t upgrade the firmware.

It wasn’t mentioned in the “read me first” text which came with the version 6 I think.

Thank you,

Sven
Sven Giebel
June 2, 2008 at 4:58 pm in reply to: finding and organizing fonts

Maybe you want to try this:
https://www.linotype.com/2631/freedownload.html

Hard to believe but it’s free.

Sven
Sven Giebel
May 21, 2008 at 3:22 pm in reply to: FAQ is underway — Walter and I could use your help

I found this very helpful:

Keywords: P2 Log and transfer crashing ingest corrupt file!

https://forums.creativecow.net/thread/8/979442#989242

Sven
Sven Giebel
May 21, 2008 at 3:18 pm in reply to: log and transfer crashes due to a corrupt file

Now here’s a question: Does anyone know why the hell this happens??

Hi Thomas!
FortunateIy I can remember the shooting, so in my case the file went corrupt because we changed the battery on our panasonic AJ-HPX2100E and I forgot to stop the camera BEFORE changing the battery. It was exactly this clip which was unusable.
Greetings,
Sven
Sven Giebel
March 24, 2008 at 9:26 pm in reply to: log and transfer crashes due to a corrupt file

Hi Andy,
thanks for your posting!
In the end I did exactly what you did: I took the camera and deleted the clip there. Repairing wasn’t an option on this clip.
Fortunately the stuff was still on the cards in the camera. Next time I will check the clips in the camera before I copy the cards content to disk.

Sven
Sven Giebel
November 14, 2007 at 2:00 pm in reply to: Four editors on one machine. How to change settings?

Thank you for your input!
Multiuser Pro looks promising. I wonder what the final release will cost.

Sven

Page 2 of 2

← 1 2