Replies – Forums – Nico Sandhof – Page 5

Forum Replies Created

Page 5 of 8

← 1 … 4 5 6 … 8 →

Nico Sandhof
December 5, 2005 at 8:57 am in reply to: Another Multibridge question

you can also use the multibridge extreme with hd-sdi (bnc-cable) and a decklink hd.
how long is the pcie-cable? look here: https://www.blackmagic-design.com/images/press_products/multibridge-studio-cable.jpg
Nico Sandhof
November 28, 2005 at 8:04 am in reply to: any box for 5.1/7.1 monitoring with FCP & DL-HDpro?

“I don’t speak German so I don’t know what nico just said, but your best solution would be a Multibridge. This will give you 8 channels analog output. You simply set up the audio tracks in your Final Cut sequence to achieve what you want.”

No, the Multibridge has 4 channels analog output. But over “db25” 8 channels in 48kHz sample rate, 24 bit, aes/ebu in- and output. These can be connected with the audio mixer of Behringer.
See times here:

https://www.behringer.com/DDX3216/index.cfm?lang=ENG

and here:

https://www.behringer.com/AES808/index.cfm?lang=ENG

The Breakoutbox of Behringer is not needed.
Nico Sandhof
November 27, 2005 at 12:27 pm in reply to: any box for 5.1/7.1 monitoring with FCP & DL-HDpro?

ich schreib mal auf deutsch, geht besser.
dann nimm doch die multibridge, und an dem aes/ebu audio out(db-25 stecker 8audio kanaele) haengste zb den behringer digitalmixer ddx3216 ran.
dafuer gibt es eine extra einschubkarte.
der ist wiederum ueber softwareupdate voll 5.1 tauglich.
insgesamt einen amtliche loesung fuer nicht allzuviel knete.
video und audio sollten nun synchron laufen.

gruesse aus norddeutschland,
nico

https://www.behringer.com/DDX3216/index.cfm?lang=GER
Nico Sandhof
November 26, 2005 at 3:48 pm in reply to: any box for 5.1/7.1 monitoring with FCP & DL-HDpro?

Here a link for you, Kurt:

https://www.cyberport.de/item/1086/996/0/20926/maudio-revolution-71-pci-soundkarte–macpc.html
Nico Sandhof
November 26, 2005 at 3:45 pm in reply to: any box for 5.1/7.1 monitoring with FCP & DL-HDpro?

5.1/7.1 production in FCP? Well much fun! There wouldn’t a more suitable software be more meaningful?
Nico Sandhof
November 25, 2005 at 7:21 am in reply to: DecklinkHD and Varicam 25p + 50p slowmo

use cinema tools to change 50p -> 25p.
Nico Sandhof
November 4, 2005 at 11:20 am in reply to: 16 channel HD-SDI and the new Multibridge Extreme

dont use “poopy old PremierePro” – use finalcutpro and you get 12 in and out 😉
Nico Sandhof
November 4, 2005 at 11:16 am in reply to: 16 channel HD-SDI and the new Multibridge Extreme

theoretically support (hd)sdi 16channel embedded (specification).
but no recording standard supports it at present.
practically “audio capture/playback support” 12channels (hd), 8channels in standard definition…
Nico Sandhof
October 31, 2005 at 6:37 pm in reply to: PCI Express Storage solutions

RocketRAID 2320 PCI Express

https://www.highpoint-tech.com/

mac-driver: https://www.highpoint-tech.com/BIOS%20+%20Driver/rr2320/Mac/
Nico Sandhof
October 31, 2005 at 9:15 am in reply to: Multibridge Extreme works with “Funkhausnorm”?

Very interesting to it the following two official products:

https://www.rtw.de/cgi-bin/rtw_data.pl?CatNo=11519G&LANGUAGE=en
(Adjustable headroom marker from -6 dB to -15 dB in steps of 1 dB)

https://www.rtw.de/cgi-bin/rtw_data.pl?CatNo=11519G-DIN&LANGUAGE=en
(Scale similar to the DIN 45406 scale (+5 dB to -50 dB).,
Usually corresponds here: “+6dbu = 9dbFS”)

Something reading (German):

“FUNKHAUSNORM PEGEL
Pegelangaben werden beim Rundfunk entweder als absoluter Spannungspegel in
dBu (fr

Page 5 of 8

← 1 … 4 5 6 … 8 →