Replies – Forums – Michael Wolf

Forum Replies Created

Michael Wolf
April 15, 2015 at 10:07 am in reply to: Anatomy of a DaVinci Resolve Composite

There is a BCC filter called Match Grain and, as of Resolve 11.1, the OFX plug-ins can access a secondary layer, so theoretically that will work.

However, I just used BCC Film Grain and the eyeball test.

Mike Wolf
Finishing Editor | Colorist
shinefinishing.com
310-357-7211
Michael Wolf
October 9, 2014 at 3:29 pm in reply to: Exporting 4 X stereo channels embeded in a QT

To get this to work you also have to have the Audio Project output settings on Direct.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
August 26, 2014 at 7:10 am in reply to: Resolve 11 odd LUM qualifier behavior

It does, however, say ‘0’ at the bottom and ‘100’ at the top, so I expected that to translate to 0% and 100% level as seen on a scope.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
August 22, 2014 at 11:35 pm in reply to: Resolve 11 odd LUM qualifier behavior

Got it. Would be nice to have an option to have the levels in the qualifiers track more closely with the levels in the actual picture.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
April 4, 2013 at 7:55 am in reply to: Avid Artist Color and Resolve – Knobs not working

Yes, they work in Avid Symphony.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
April 3, 2013 at 12:53 am in reply to: Anybody using Avid Artist Control with Resolve?

I am using a Euphonix MC Color with Resolve Lite 9.1.

Everything works except for the soft knobs. The only ones that work are the HSize and VSize on the Input Sizing Page. All the others do not adjust the parameter they are supposed to.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
April 3, 2013 at 12:52 am in reply to: Avid Artist Color Sluggish on Resolve 9 Lite

I am using a Euphonix MC Color with Resolve Lite 9.1.

Everything works except for the soft knobs. The only ones that work are the HSize and VSize on the Input Sizing Page. All the others do not adjust the parameter they are supposed to.

Michael Wolf
http://www.mikewolfpost.com
Michael Wolf
March 17, 2008 at 11:47 pm in reply to: Kona 1080p output to Hi5 to HDMI (Grrr!)

Matt-

I have a Avid Adrenaline HD, a JVC DT-V24L1D HD Color Grading monitor and a big 46″ 1080p Samsung consumer LCD for clients in the cheap seats. I have the same issue.

The JVC takes all signals thrown at it via SDI. The Hi5 converting SDI to HDMI sending to the Samsung worked for all signals except 23.98psf. I was told by AJA that it is not in the HDMI spec, as the Samsung will display 1080p24 over HDMI from the BluRay just fine.

So I got the HDP instead. Now the Samsung is displaying “Unsupported format” for all signals coming through the HDP. SD and HD. I am using a DVI->HDMI adapter and my installed HDMI cable. Are you using an adapter or a DVI->HDMI cable?

Mike
Wild Pictures
Venice, CA