[Marc Clancy]

I’m at Half Res Good, but the problem persists at Quarter Good as well… 10 or 8 bit doesn’t change anything either. Rocket is up to date on firmware too.

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Oh and Sonnet eSATA pro on OS X 10.6.8

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Sorry. This machine is Red Rocket, Deck Link, 460, Quattro, Atto SAS

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Yea, the Mac Pro is under warranty and Apple begrudgingly offered to get me a new board… But I’m working on some non-Resolve stuff too and it is gonna take them over a week to get the computer back to me. So it’s an option, just not right at this second.

Quadro all by itself in slot #2 is the same: x1 PCIe lane.

I’ve got another MacPro 5.1 with a 4000 coming back to me on Tuesday, so I can then check slot #2 with that card and that computer with this 4000… Hopefully that will pin-point the problem.

I haven’t reset the NVRAM with only the Quadro in it, but I’ll give it a try.

Marc

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Yea, me too.

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

No, it doesn’t follow the cables. The Quadro works x16 in slot 1 with both aux power connectors as does the ATI in slot 2.

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Toby,

So in slots 3 and 4 the Quadro shows up as x4, with or without the decklink and ATTO in the other two slots and the ATI in slot 1…

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

No change with or without the ATTO or DeckLink in any combination therein. I haven’t tried putting the Quadro in slots 3 or 4… but I can try tomorrow. I guess that could provide some insight on the relationship between the ATI and the Quadro… Do I need to worry about overloading the x4 slot?

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

I cleared the NVRAM before (but with the other cards in) and it didn’t help. Just tried it again without anything but the ATI and still no luck.

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770

[Marc Clancy]

Yea, they should come out of the Lut Generator as _davinci3d.dat . Did you select Davinci as the File Format?

… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”

Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770