Activity › Forums › DaVinci Resolve › 5k Epic Footage “Jitter”
-
5k Epic Footage “Jitter”
Posted by Marc Clancy on November 20, 2011 at 5:45 pmIs anyone getting a jitter or unstable playback (fps jumps between 20 to 24 constantly on playback with no leveling out) with 5k Red footage? Its definitely has something to do with the red rocket, as I can add a bunch of nodes and get the same results… Any suggestions are welcome.
Marc
… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”
Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770Rohit Gupta replied 14 years, 5 months ago 5 Members · 8 Replies -
8 Replies
-
Sascha Haber
November 20, 2011 at 8:03 pmNo Rocket, no love
A slice of color…
DaVinci 8.0.1 OSX 10.7
MacPro 5.1 2×2,4 24GB
RAID0 8TB eSata 6TB
GTX 470 / GT 120
Extreme 3D+ WAVE -
Marc Clancy
November 20, 2011 at 9:17 pmSorry. This machine is Red Rocket, Deck Link, 460, Quattro, Atto SAS
… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”
Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770 -
Marc Clancy
November 20, 2011 at 9:35 pmOh and Sonnet eSATA pro on OS X 10.6.8
… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”
Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770 -
Margus Voll
November 21, 2011 at 4:03 amYou do not say what settings you have your red clips.
Epic stuff i.e. 5 k is hard for machine in full quality.
As you know 5k is more resolution compared to 4 k so it really will bog down regular machine as
fast as it can.—
Margus
-
Marc Clancy
November 21, 2011 at 1:57 pmI’m at Half Res Good, but the problem persists at Quarter Good as well… 10 or 8 bit doesn’t change anything either. Rocket is up to date on firmware too.
… “Welcome to Whit’s End. If you take a look to your right you can catch a glimpse of PCIe Slot # 2 …”
Mac Pro 5.1
Atto Celerity FC
DeckLink HD Extreme 3D+
Quadro 4000 for Mac
ATI 5770 -
Elan Dassani
December 15, 2011 at 8:43 amHi Mark, I’m getting the same problem on our Epic project. Its not terrible, but it shouldn’t be jittering at all with a Rocket Card:
Mac Pro 12-core, 32 GB RAM
OSX 10.6.8
Resolve 8.1
Red Rocket
Cubix
2 Quadro 4000’s
Running off a Facilis SAN, 8 GB FiberLatest Rocket Firmware and Drivers
Did you find a solution?
thanks!
Elan Dassani
Master Key Post -
Margus Voll
December 15, 2011 at 8:51 amHi.
As you see from config guide 32 gig ram is bad.
Also 2x 4000 is relatively weak for 5k anyway.
Look around here people have pointed to new gtx cards that have more computing power than 285.
If you have cubix you can have really hot ones instead of 4000 what you can have as gui gpu.
—
Margus
-
Rohit Gupta
December 15, 2011 at 9:01 amHi,
A few questions:
1. What resolution Epic files are you using?
2. What decode mode are you using – Half Res Prem/Half Res Good?
3. What Rocket Firmware are you using?Regards,
Rohit
Reply to this Discussion! Login or Sign Up