Lee Schneider
Forum Replies Created
-
Simon, that’s a perfect quick fix workaround, thanks. It’s definitely a monitor issue as my previous one didn’t have a lag. I just purchased a 4k monitor and have it connected to the MacPro via HDMI and there’s probably a better way to connect it, so I’m all ears if you have a suggestion. Thanks again!
Lee -
Yeah I have the FireStudio set as the Master Clock. I’ve tried a lot of things, just can’t figure it out… and of course it’s a nightmare to try and edit this way. lol
-
That’s it, thanks!!!
-
Andy,
Thank you for taking your time to help. I was actually talking about in the timeline. I can color correct a clip and then it shifts in the timeline after rendering. I experimented by taking 2 heavily effected frames in the timeline (color correction, sharpen, Film Convert) and then cutting them. I’ll render one frame and not the other, and then look at the two. There’s definitely a difference between them so the rendering is causing a shift. The footage is from a 5D MKIII so they are h264 files. I have the previews set to QT ProRes422. And I just tried the same test with some RAW footage that was converted to ProRes and got the same thing. Now it is slight, and seems to be less w the converted footage, but it’s there. I’ll convert some of the h264 to ProRes and do a comparison (so I’m looking at the same frames… original 5d h264 and the same frames converted to ProRes) and see what happens. And yes… I’m beginning to sound like a nut! lol
Lee
-
Thank you, thank you, thank you! I knew it was something as simple as checking a box, but didn’t notice the “use previews” box. It took my hour long export down to under 30 seconds. lol
So, here’s another question. I can’t find an option to render in RGB or YUV like there was in FCP. I’m getting a very slight color shift between rendered and non rendered media and in FCP, switching it from RGB to YUV solved that issue. I didn’t know if there was something similar in PPro that I could try.
Thank you again VERY MUCH for the help.
Lee
-
I had started the thread Roz was mentioning. I’m still having the problem. I have waveforms, but no signal in the meters sometimes. It’s happened on 2 projects now (Pro CC 2014 on a Mac) but I’ve worked on a new project for 2 days and no problems so far. On the 2 projects that are having problems, I can re start PP several times and eventually the audio will work. VERY scary and frustrating.
Lee -
Sorry for wasting everyones time, but thanks for the replies. Turns out I didn’t do a good job of isolating the problem during my first tests, but when I did them again, I narrowed it down to one of the Hoodman card reader/adapters. One adapter works fine on both cameras with all SD cards, and the other adapter is no bueno. Thanks again for the replies!
Lee
-
No… they aren’t locked. I’ve checked them and tried them with the slider in both positions. I have a Hoodman RAW card, and a couple of SanDisk Extreme Pro cards. It’s REALLY odd that they worked fine for a short while after the firmware upgrade, and now they don’t. Even more odd that I popped one in yesterday and it said it was ready, then when I ejected it & put it back in, it once again said it was locked.
-
Found em… sorry!
-
Thanks for the info Ty, I greatly appreciate it!
Lee