Replies – Forums – Justin Schultz

Forum Replies Created

Page 1 of 2

1 2 →

Justin Schultz
February 6, 2015 at 6:51 pm in reply to: Need software advice for matching delivery specs

Thanks so much for the reply Eric. Very helpful and much appreciated.
Justin Schultz
February 5, 2015 at 3:26 pm in reply to: Need software advice for matching delivery specs

Thanks for the reply.

I’m editing in PPro CC.

Yes, it does seem like that is what they want. However the XDCAM HD 422 1080i50 presets in AME are missing many of the line items listed in the specs, e.g.:

Video
Format settings, BVOP
Color space: YUV
Compression mode: Lossy
Bits/(Pixel*Frame): 0.997

Audio
Format settings, Sign : Signed
Codec ID: sowt
Or the ability to set the audio bitrate to 1536kbps

Wrapper is a little vague in the specs but all of my options are different in AME whether i choose .mpg, .mxf, or .mov

I was hoping someone could tell me that some of these specs are assumed in certain settings or referred to as something else. Or if they knew whether Episode Pro would display more of the spec line items.

I will probably download the trial of Episode Pro to see if that answers my questions, while setting up some test deliveries from my AME choices.

It’s a tough topic to not be verbose with! Thanks for reading.
Justin Schultz
January 14, 2014 at 8:00 pm in reply to: Compressor 4.1

hope it’s not gosh to post here, but Larry jordan has a good explanation on why older MacPros are having trouble with the new Compressor. Seems it wasn’t written for older processors.

https://www.larryjordan.biz/compressor-4-1-a-tip-to-increase-speed/
Justin Schultz
February 10, 2012 at 6:31 pm in reply to: HDMI AV monitoring out from my graphics card in 10.0.3?

Thanks for the replies gents.

I’m actually trying to get the HDTV to been seen as the A/V out monitor from FCPX not just another display.

Right now with the HDTV hooked up, FCPX Preferences>Playback still shows “none found” for the monitor select drop down.

David you may be right about the beta-ness, since it’s not coming out of a true I/O device and out of the HDMI port on my graphics card. My system is a little frankenstein-y. I have a non-Apple (Diamond) 5770 card hooked up to an external ExpressCard GPU dock on an old MBP.
Justin Schultz
February 1, 2012 at 4:28 am in reply to: 10.03 released

Here here Ben. My issue with the discussion has never been a matter of content, but tone.
Justin Schultz
January 31, 2012 at 8:03 pm in reply to: AJA v10.2 “X Beta” drivers for FCPX 10.0.3 available now

How would one install it side by side with say the 9.1 driver for LHi? possible on the same system disc?
Justin Schultz
January 31, 2012 at 7:59 pm in reply to: Final Cut Pro X and Kona

Will this driver support both FCP7 and FCPX? Or will it totally mess up my FCP7 system on the same machine?
Justin Schultz
October 21, 2011 at 10:51 pm in reply to: FCP X to FCP 7 for 50 bucks (you know, to OMF, Color, et al)

sorry, with the CatDV workaround. haven’t tried FCPX27 yet
Justin Schultz
October 21, 2011 at 10:50 pm in reply to: FCP X to FCP 7 for 50 bucks (you know, to OMF, Color, et al)

i had pretty useless results trying this with a fairly simple sequence
Justin Schultz
September 15, 2011 at 11:55 pm in reply to: Kona3 capture 1080sf23.98 to 1080i29.97?

I just trust the guys from COW more. 😉

plus the AJA guys didn’t give me any further advice.

thanks for the response.

Page 1 of 2

1 2 →