Juan Salvo
Forum Replies Created
-
No. You must buy the full version.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Standard Candle Test result:
2 nodes = 22
4 nodes =13
6 nodes = 10
12 nodes = 5
NR 4 = 8
NR 3 = 5
NR 2 = 2
NR 1 = 1Like a talking dog.. it’s amazing it can happen at all. 😉
There could probably be a lot done to optimize performance. Looking forward to seeing if there is some mention of this model in the DaVinci config guide.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Meant to add: Big thanks to Walter Soyka for running the benchmark on the Quadro 6000! Very revealing results. Thank you for sharing.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Could you try swapping raid card and rocket? Or changing the slot rocket is in. Did this work properly before 10.7.4 update?
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Check for a rocket driver & firmware update. 10.7.4 messes up a lot of things.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Looks like a stock 580. Thanks for posting Rohit. Interesting, so the overclocked 680 has performance similar to that of a standard 580. I’d imagine then the best or one of the best performing cards for resolve might be an overclocked 580. Like the GTX 580 3gb classified. Of course that card could never run in a MacPro, it would require too much power and produce too much heat. But for those running cubix or going to windows, looks like a good choice.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
I’ve updated my post with benchmarks for Maximus & q6000 as well as others.
https://forums.creativecow.net/readpost/2/1019643
It’s not pretty for the quadros.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
Working on it. Not even sure if cs6 supports the 650m even by force. Will let you know,
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
I’ll do a new post when I have more updates. But we’ve added a few other cards to the list as you can see in the chart on the first post.
Online Editor | Colorist | Post Super | VFX Artist | BD Author
-
The nvidea drivers added support for pc cards on the Mac. The caveat is that boot screen doesn’t display. But you can add the card as a secondary card and not connect the GUI display to it and still use it for CUDA, or you can buy a card from macvidcards with efi firmware modded on that allows support durring boot.
Online Editor | Colorist | Post Super | VFX Artist | BD Author