[John Vogel]

Thanks for your help Robin. I finally exported the layers out of Photoshop as PNG files and did the moves I wanted in FCP.

Thanks again.

jv

[John Vogel]

Thanks again Robin. Questions answered.

jv

[John Vogel]

LOL, All these years of using that program as a hack and thought it operated under the same parameters.

Does the same hold true if I’m looking to embed my motion file in my time line?

Sorry for the amateur questions. I know just enough to get me in trouble.

jv

[John Vogel]

When I open Motion 4 it says “select a present here”. The default is set at NTSC Broadcast SD. When I select the drop down, there is nothing that is Prores. I see DVCPRO HD, HDV, EXCAM and some other misc presets.

[John Vogel]

Thanks Robin. I clarified my issue in my next reply.

[John Vogel]

Agreed. Ty, keep your eyes open on ebay for the wireless Tom recommends. They’re used on all sorts of national shows and many times, the lead soundman or whoever is in charge of production will off load the wireless packs at the end of the show’s run. Suddenly you’ll find 25 listed on ebay from the same seller.

Also save your pennies for the MKE-2. After you’ve bought your first, you’ll never go back.

[John Vogel]

For those of us who don’t know what colortrace is, I found this:

https://forums.creativecow.net/thread/277/24372

Thanks Brandon!

[John Vogel]

Problem semi solved. I made sure all my coloring/mask where saved in my “memories” section of my original project, removed all clips, brought them back in and they were all at 29.97. I then loaded from the “memories” section to each clip.

Now delivering.

Thanks

[John Vogel]

On the same HD?

[John Vogel]

Great idea!