Forum Replies Created

Page 34 of 72
  • Jeff Schroeder

    April 26, 2012 at 1:55 am in reply to: DVD Architect 5.2 Render Freeze at 84% and 98%

    Eddie,

    How much time does it take to get to 84% or 98%? In Minutes:Seconds

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:24 pm in reply to: equipment suggestion

    BRITE VIEW Air SyncHD Wireless 1080p HD Video / Audio Transmission Kit
    https://www.bhphotovideo.com/c/product/799713-REG/BRITE_VIEW_BV_2322_Air_SyncHD_Wireless_1080p.html

    No recommendation.

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:14 pm in reply to: (My) Vegas hates WAV files

    A codec pack (either end)? Bad audio files from the user? Created on a mac?

    just a few guesses…

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:10 pm in reply to: DVD Architect 5.2 Render Freeze at 84% and 98%

    Stephen is right. Even if you did use one of the templates, DVDA may have to re-encode your stuff, just because you put too much on one DVD.

    Here’s how it works, You have 1, 45 minute movie rendered with Mpeg-2 using DVDA template in Vegas. This will encode just fine on a 4.7GB DVD. If you have 3 of these 45 minute videos and try to fit them on one DVD you will be forced to re-compress in DVDA because your total size is too much.

    This is where Mark’s DVD Bitrate calculator comes in. When you add up all the items, videos, motion menus, subtitles, etc., the calculator can tell you what VBR bitrate settings to encode your video at to get the best quality in the space available.

    You can get ‘Mark’s” here: https://www.johncline.com/bitcalc110.zip
    There will be a learning curve to understand it all, but you will be glad you did.

    Jeff

    Labels: bitrate calculator, VBR Calculator, Mark’s

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 12:09 pm in reply to: Rendering 1 hour video?

    Yes, Stephen. You are right. But, having 16TB available I almost forgot what that was all about.
    (just kidding, I am blessed to have a great system.)

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:43 am in reply to: DVD Architect 5.2 Render Freeze at 84% and 98%

    For starters you could ‘save-as’ a copy of the project to a new directory, with the media files (drop down box below filename). Rename the original folder so it can’t be found by DVDA. Re-boot (can’t hurt) open the new copy and attempt a DVD. This should clear up a lot of problems. If the build fails, open each media file in Vegas to see if any are damaged in some way.

    Good luck,

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:35 am in reply to: Rendering 1 hour video?

    If your computer can render a 5 minute video, it can render a 5 hour video. The difference is time. Lots of time in your case. I have an old Athlon desktop at home, dual core, 2GB and it just cranks away for hours. You might want to check your email before it starts!!

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:31 am in reply to: Why does SV merge all video tracks into one?

    Does it show up in your recent projects list? Because I’m not really following your description. If you have proj.veg with 8 tracks, you should be able to open proj.veg the next day and have the same 8 tracks. If you open proj.veg as a media file in another project it will be nested.

    If that’s the case, try right-clicking on the ‘merged’ event and see if there is an option ‘edit in Vegas’. That would mean it is indeed a nested project file.

    Maybe you could send the .veg file(s).

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:21 am in reply to: How do you unnest?

    Yes, simply delete it. You can’t expand it to tracks in the host project, if that’s what you meant.

    That would be cool though.

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

  • Jeff Schroeder

    April 25, 2012 at 2:18 am in reply to: Odd Vegas & QT Issue & Solution

    Dude, you fell for the old separate-hard-drive-stalled-render trick! ha!
    Just kidding man. That is handy to know. Thanks for posting.

    Jeff

    2-Xeon X5680 @ 3.33 MSI Mobo 48GB DDR3 GTX 580 3072MB 16TB Attached Storage Win7 Vegas 11 x64

Page 34 of 72

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy