Replies – Forums – James Rhodimer

Forum Replies Created

Page 1 of 2

1 2 →

James Rhodimer
February 22, 2008 at 2:08 am in reply to: FCP log and capture HDV

alright. well here are my findings.
I did everything one by one. I get a message after restarting FCP and doing the HDV setup…

“unable to locate the following external devices:
HDV (1440×1080) 60i

your system configuration may have changed, or your deck/camera may be disconnected or turned off.”

I’ve double checked the firewire cable with my GL 2 and it’ works fine so that’s not it. I see that there is an option for a HDV firewire cable or an HD firewire yet the apple store told me that there is no HD firewire cable. anyway I am unable to capture again. I am in 6.0 now too. Just trying anything.

thanks much for your advice.

jim
James Rhodimer
February 22, 2008 at 1:14 am in reply to: FCP log and capture HDV

Thank you Don. I will try this and see how it works.

cheers

jim
James Rhodimer
February 22, 2008 at 1:14 am in reply to: FCP log and capture HDV

thank you much. I have a hunch alot of this has to do with the firewire cable. I have gotten it to work and now cannot.

cheers
James Rhodimer
February 22, 2008 at 12:49 am in reply to: Canon XHA1 and FCP – can’t capture video, pls help!

I just went through this. I updated to 6.0 and it works.
It takes alot of work for my taste but at least now I can capture. I hear that you should have 5.4 or later but That didn’t work for me either. cheers
jim
James Rhodimer
February 1, 2008 at 11:10 pm in reply to: Web file format?

works great. thanks Russell. thanks Zane.
James Rhodimer
February 1, 2008 at 10:37 pm in reply to: Web file format?

thanks. I haven’t tried that compressor yet. I’ll give it a whirl and get back to you.

cheers
jim
James Rhodimer
February 1, 2008 at 8:14 pm in reply to: Iris problems on XH A 1

ahh yes, I see. I just did it. it did just that.
luckily that won’t hurt my type of use. damn.
James Rhodimer
January 30, 2008 at 7:23 am in reply to: Iris problems on XH A 1

hi, I just got that camera and maybe this will help. I found that those two dials should operate separately. I just did what you were talking about. As I zoom out, the same motion on the dial at the far back will open it up. I think that your dials are stuck together if moving one is also operating the other. because mine don’t do that. they should not effect each other. But that is just based on my little experience.

cheers
jim
James Rhodimer
January 30, 2008 at 7:06 am in reply to: problems capturing 1080i form HV20 in FCP 6

I am having the exact same problem with both my XH A1 and my friend’s sony FX1. with the XH A1, I remove the firewire cable and am only then allowed access to the “playback” setting. I change it to HD. I then put the cable back into the camera. Boom it automatically returns to STD and greys out so I cannot access it. the tape is brand new from Canon and I only shot about 2 minutes in HD format. so I can’t see what’s making it change on it’s own.

thanks for any words of advice. I’m in fCP 4.5 on a G5
James Rhodimer
October 16, 2007 at 4:27 pm in reply to: Capture Preview Disabled

yes thank you so much. I figured it had something to do with tiger

cheers

Page 1 of 2

1 2 →