Eric Toline
Forum Replies Created
-
I make those up all the time. Contact me and we can discuss your requirements.
Eric
954-255-7628
\”I push the RECORD button and hope for the best\”
-
I would suggest you look at the Sound Devices Mix Pre series of mixer recorders but be aware they start at around $600 and go up from there.
\”I push the RECORD button and hope for the best\”
-
While I don’t doubt your results for eliminating wind noise as part of the ambience, I wonder how that setup would work on dialog in the same conditions.
\”I push the RECORD button and hope for the best\”
-
Really? I’m somewhat surprised a question like that is being asked. Because you can’t unring the bell. Adding audio efx in post gives you the opportunity to try different sounds at different levels that might work better without stepping on the tracks. Things change between shoot day and post for many reasons and being able to make the change with no effort is why there’s post. In the feature film world the post budget is enough for you to retire on.
\”I push the RECORD button and hope for the best\”
-
Could be that you have intermittent connections at one of the connectors. Open each XLR connector and look for loose or unsoldered wires at the solder points. You can test the cable when connected by moving the cable along it’s length and listening where it happens. If it’s in the cable and not at either connector then a new cable is required. Also be sure the connectors are firmly seated where connected to the mic and the connection on your mixer. It could also be a loose connection in the mics output XLRM plug.
\”I push the RECORD button and hope for the best\”
-
Perhaps you should consider a wireless system with a plug on transmitter and receiver that attaches to your camera. Reasonably good ones start around $600+ for the set.
\”I push the RECORD button and hope for the best\”
-
Recommend? Sure me. Call me at 954-289-4770. Production Sound Solutions in Ft. Lauderdale any time after 9:30 am. Looking forward to hearing from you.
Eric
\”I push the RECORD button and hope for the best\”
-
A coiled jumper cable might be just what you need. Stretches from 20″ to about 5′ with M&F XLR Straight or Right angle connectors.
\”I push the RECORD button and hope for the best\”
-
Pete’s one of the good guys. I’ve known him for a long time and I send all of our 416 conversions to him. Next time you talk to him tell him I said hello.
Eric Toline
Production Sound Solutions, Inc
Ft. Lauderdale, Fl\”I push the RECORD button and hope for the best\”
-
Here’s the direct link; https://www.416Tupgrade.com.
\”I push the RECORD button and hope for the best\”