Forum Replies Created

Page 11 of 57
  • Dave Jenkins

    December 26, 2013 at 6:11 pm in reply to: So what MacPro configurations are people ordering?

    I ordered the stock 6 core. I only use about 150 gigs on my internal and I will switch ram if needed but I wanted to have a stock until to start with and then upgrade what I need. I’m hoping the GPU’s will be enough but the price is where I wanted to be.

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • I’m going with the AJA T-Tap and the UltraStudio Mini Monitor, hopefully I can use both without conflicts. Then when we start with 4k I’ll take a look at the options. I’ll keep my AJA card in my current MacPro for capture. I’ve always loved AJA products but looking at moving to DaVinci Resolve for grading so….

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 20, 2013 at 1:35 am in reply to: 10.1 and broadcast monitoring?

    AJA Lhe+ is working fine in a MacPro

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 17, 2013 at 5:34 pm in reply to: Canon 5d Mark III clips wont play in multiclip

    [David Powell] “Maybe my computer isn’t up to the task.

    Your Computer:
    I got the biggest and baddest imac from late 2011 i7 3.4 with a t-bolt Raid

    I don’t think it’s your computer, I’m cutting on a 2012 Mac 3.2 quad core with 32 gigs of ram and 4 internal drives at raid 0, so your system should be crushing mine.
    I know you don’t want to hear this but personally I think it’s plural eyes causing you the problems.

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 17, 2013 at 4:49 pm in reply to: Canon 5d Mark III clips wont play in multiclip

    David, you can say it doesn’t work for you but that’s not true for everyone! You are misleading James that Multicam doesn’t work. I have a 1 hour & 49 minute multicam clip that plays in the event browser and in a timeline. I used FCP X to sync the angles.

    I have Multicams ranging from 22 minutes to 1 hour & 49 minutes. 5 cameras with lots of stops and starts. Cameras are 7D’s, JVC HD camera, Sony Handycam, mixed frame rates at 29.97 & 23.98 and it plays. No Proxy or transcoded media. I do have the playback quality set to better performance. The only thing I don’t have that you’re talking about is footage from the 5D or other audio sources.

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 17, 2013 at 3:48 am in reply to: Canon 5d Mark III clips wont play in multiclip

    I will check tomorrow.

    Out of curiosity, are you able to get your 1hr 49min multiclips to play on the event side?

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 17, 2013 at 12:35 am in reply to: Canon 5d Mark III clips wont play in multiclip

    Ah, okay I misunderstood this statement.

    X does not have the ability to sync long (1-2 hour) multi clips. It works swell for short segment or say 3 long clips that are close in length. 3 cameras of start stop dslr, multiple audio sources faggetaboudit. Actually as I’ve complained many times, it doesn’t handle long multicam stuff well at all. I just make it work. In fact any long multi clip wont even play on the event side, but thats another issue only Apple can fix.

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 16, 2013 at 11:50 pm in reply to: Canon 5d Mark III clips wont play in multiclip

    I have Multicams ranging from 22 minutes to 1 hour & 49 minutes. 5 cameras with lots of stops and starts. Cameras are 7D’s, JVC HD camera, Sony Handycam, mixed frame rates at 29.97 & 23.98 and it plays. No Proxy or transcoded media. I do have the playback quality set to better performance. The only thing I don’t have that you’re talking about is footage from the 5D or other audio sources.

    [David Powell] “X does not have the ability to sync long (1-2 hour) multi clips. It works swell for short segment or say 3 long clips that are close in length. 3 cameras of start stop dslr, multiple audio sources faggetaboudit. Actually as I’ve complained many times, it doesn’t handle long multicam stuff well at all. I just make it work. In fact any long multi clip wont even play on the event side, but thats another issue only Apple can fix.”

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 16, 2013 at 5:11 am in reply to: Canon 5d Mark III clips wont play in multiclip

    So are you using plural eyes instead of FCPX built in sync?

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

  • Dave Jenkins

    December 1, 2013 at 3:16 am in reply to: Shortcut for jump to in/out point in event viewer?

    I do that all the time

    Dajen Productions, Santa Barbara, CA
    MacPro 3.2GHz Quad Core – AJA Kona LHe+
    FCS 3 OS X 10.7.4
    FCP X, Logic Pro, Squeeze, Filemaker 10.8.3

Page 11 of 57

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy