Daniel Elder
Forum Replies Created
-
I have tried so many different things, settings, frequencies, codecs, and nothing is working right. We used an uncompressed format, but it didn’t look good but the audio was in sync. Whenever we use the dv50 we have had audio drifts. I can’t make sense of this, what-so-ever.
We have tried different settings on the deck, we tried it at 44.1 khz, which oddly seemed to work, but that shouldn’t be the case we would never record at 44.1 khz, never. We are now trying it at 5 min. increments, WHAT A PAIN! I will let you know how that goes, but any other suggestions gladly welcomed
Thanks
Daniel Elder
Associate Producer
http://www.luminair.com -
go to apple support, then to software, then to final cut pro, and the update will be on the side bar.
Once there you will need to have your apple id and serial number handy. And then you can download
Daniel Elder
Associate Producer
http://www.luminair.com -
I will give all of those a try and get back to you on it. If you have any other thoughts please let me know.
Thanks
Dan
Daniel Elder
Associate Producer
http://www.luminair.com -
So we did another test, and we imported it in at 44.1 khz and that is in sync, which shouldn’t be the case because our settings are at 48 khz. Why would these settings be different from one another?
Dan
Daniel Elder
Associate Producer
http://www.luminair.com -
Here is the kicker, all of the footage plays fine on playback, and plays fine when we are previewing it during the capture, but once the footage is in, the audio changes rate from clip to clip. We have the setting on “make a new clip” on timecode breaks, and each clip comes in at a new audio frequency. So that makes us believe that it’s related to FCP and not hardware, do you agree?
Daniel Elder
Associate Producer
http://www.luminair.com -
It’s a pain in the ass, I don’t understand why this setup worked fine once for us, and is not working at all now. What a difference a year could make, JEEZ.
The DVX-100 audio sync tool on the FCP studio disks won’t help will it? There is no other solution that anyone has come accross yet, is there?Daniel Elder
Associate Producer
http://www.luminair.com -
Sync issue continues, it is completely out of sync on capture, in sync when just playing back through the monitor, I don’t have any clues as what to do?
Daniel Elder
Associate Producer
http://www.luminair.com -
We are not having luck with the “advanced pulldown option,” but we noticed that at 29.97 the audio was coming in at 47.65 or something along those numbers, and we did a test at 30 frames instead of 29.97 and the audio came in at 48. So we are trying to capture a tape at that setting to see if that works as well. Wish us luck
Daniel Elder
Associate Producer
http://www.luminair.com -
We have captured it straight to the DV50 Tape, and it is in sync on the tape, we would do playback on set, and everything seemed fine. We are looking into a setting on the DV50 preset that is a button to Remove the Advanced pulldown and/or duplicate frames from firewire source to see if that solves the problem, hopefully?
I will let you know if this option works, or if your suggestion works.
Then the next step financially is to get the Analog/digital board for the AJ-SD93.
Thanks
Daniel Elder
Associate Producer
http://www.luminair.com -
I captured via firewire through a AJ-SD93, we are capturing through the easy setup of DVCPRO 50 Anamorphic. We are in sync at the head, and then it gradually goes out of sync. Should we try to capture the audio seperately from the video?
We just did an easy setup, DV50 Anamorphic, why would this happen?
Thanks
DanDaniel Elder
Associate Producer
http://www.luminair.com