Chris Stevens
Forum Replies Created
-
Great news! I haven’t heard about it, but will investigate. I’ve now been through FOUR sets of EX3 base plate thingies & that’s even while using a Zacuto base plate system. The only thing holding it all together was the matte box!!
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
Thanks for the quick reply Floh. Unfortunately the EX3 can’t output SDI when the Firewire port is switched on! So, as there are separate TC outputs on the EX3, can I connect this to the LTC timcode input on the HDx box?
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
I have a spare HDx box if you’re interested contact me offline chris@waterlineproductions.co.uk
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
The sooner the better. Please reply to this Wickham – we need to know!
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
I bought the lens from Mitcorp, London. I believe it’s the first one in the UK.
I haven’t tried any other 1/2 inch lenses with the adapter yet, but plan to use a Letus with 35mm Nikon lenses when I have a shoot that allows sufficient time for tinkering with such toys!G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
Yes John, I have the new WA Fujinon lens for the EX3, and a fine beast it is. However, if you’re looking for a shallow dof, this is not the lens for you. You will need an adapter & suitable lenses for that. But if you need the ability to shoot wide, have the same focus facilities as the standard lens & use the same zoom demand, this is the lens to use. Physically it’s a little heavier & longer than the standard, but doesn’t make hand held operation any more difficult. Image wise I have only seen my back focus chart through it so far, but will endeavour to test it this weekend & give some feedback early next week.
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
Yes. Better gamma, but saturation still down. Should I play with the Colorsync profiles in the QT exporter?
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
Sorry Wick. forgot to answer your question: Codec is Media 100 HD (PAL) clips media digitised 10 bit uncompressed SD.
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
I have just noticed there’s a Colorsync tab in the QT exporter. Mine was defaulting to Current monitor for both source & destination profiles. Should I set these to PAL/SECAM, Apple RGB or what?
G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID -
OK I now understand that without Deck Control Media 100 will not see TC.
Can I use Firewire deck control while capturing SDI?G5 dual 2.7, OS10.5.1, 4G RAM
Media100 HD V12 & Producer, AE 7
5.6 terra RAID