Forum Replies Created

Page 127 of 701
  • Bob Zelin

    September 28, 2014 at 10:31 pm in reply to: difference between a direct attached NAS and SAN

    https://compnetworking.about.com/od/networkstorage/f/san-vs-nas.htm

    one of countless, easy to understand articles via Google

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 28, 2014 at 10:28 pm in reply to: ProRes Data Rate Calculator for BMD Recorders

    this is wonderful Micha !
    It’s like AJA Data Calc, but you can run it on line, instead of having to download it to your Mac or your iPhone.

    https://www.aja.com/en/family/software

    bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 28, 2014 at 10:24 pm in reply to: Promise Pegasus2 R4 8TB Support

    YES, I know what to do –
    call Promise tech support, and ask them what to do. Here is their phone #. Please tell us how Promise support was when you called them.
    Bob Zelin

    PROMISE Technology USA

    580 Cottonwood Drive, Milpitas, CA 95035, USA

    Office Hours: Open Monday-Friday 8:30 am. – 5:30 pm (Pacific Time)
    PHONE: +1 (408) 228-1400

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 27, 2014 at 3:12 pm in reply to: Setting up a LTO-6 Backup

    and get the H680.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 27, 2014 at 3:11 pm in reply to: Setting up a LTO-6 Backup

    Hi Ed –
    as you research alternate LTO backup systems, you will find other competing single drive systems that will
    work for you, but for a tape library system, you will not find a better price and easy to use system
    than the Tolis LTO system with the BRU software.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Mark –
    you keep referring to the 2K workflow, as if 2K, or 4K mean something. It doesn’t. All these data rates are based on the compression codec that you are using (like ProRes422, Sony XDCamEX, RED r3d, DVCProHD, etc.).

    Blackmagic and AJA record based on Apple ProRes codecs, or AVID DNxHD codecs, so it can be 2K 4K, etc, it’s not some crazy bandwidth, because NO ONE is doing uncompressed versions of these.

    So look at RED – specifically, the crazy hi end RED Epic Dragon shooting at 6K, at a 5:1 compression ratio.
    Go to https://www.red.com/tools, click on Recording time, and pull up this selection, as it’s about as hi end as you can get. This only requires 145 MB/sec, which is nothing for a 10G network from any company.
    Standard AVID or Apple codecs range between 20 – 40 MB/sec, so they are nothing for any network.

    There are lots of digital disk recorders. At the Cow, we like AJA and Blackmagic, but there are plenty of others, ranging from CineDeck to Softron, to Atomos, etc, etc, etc. All of these products work, just like all the shared storage systems work. You or your friend need to stop asking questions on Creative Cow, and start calling some of the companies that have been suggested to you, to ask them specific questions about their systems, their capabilities, and most important, their cost.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 25, 2014 at 10:50 pm in reply to: Transfer files from Thunderbolt-only raid to PC

    Todd is correct. There is no 50 dollar card you can add to your little PC (or your old Mac Pro) to read Thunderbolt. You have to PAY to play.

    Hate MAC’s? Want to hookup to a PC ?
    Buy one of the new Z Series HP Workstations –
    https://www8.hp.com/us/en/hp-news/press-release.html?id=1473065#.VCSbYNItCUk
    that have thunderbolt.

    Now don’t start whining that you can’t afford to buy this new stuff – because ALL OF US have to buy this new stuff. Like I said – you want to play in this game, you have to KEEP SPENIDNG MONEY. How long? Forever.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • and you don’t want SSD’s in your RAID arrays, because they are too expensive. $1000 for a 1TB SSD, when you spend about $300 – $600 for a 6TB 7200RPM SATA drive. And $200 for a 4TB drive. So you do RAID 6 to prevent catastrophic failure. Look at any brand out there, including AVID and Facilis – no one is using SSD’s in these arrays.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • $30,000 for 100 TB of RAID 6 storage. Non proprietary, easy to use, no special software to install, all off the shelf components. Up to 11 clients for a “starter system”, with the easy ability to expand the number of client computers. Want more clients, buy another switch. Want more drive storage, daisy chain it on. Each client will get about 100 MB/sec for every client using regular Cat6 cable.
    Want more speed, so you can do RED Epic Dragon 6K – simply add a thunderbolt to 10G Ethernet box ($599 each per computer).

    $30,000. Want less storage, it will cost less.

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

  • Bob Zelin

    September 24, 2014 at 9:25 pm in reply to: Transfer files from Thunderbolt-only raid to PC

    1) buy a Mac
    2) network the two computers (you need a Mac to do this) and transfer the files from their drives via the Mac Ethernet port to your drives
    3) buy a Mac

    Bob Zelin

    Bob Zelin
    Rescue 1, Inc.
    bobzelin@icloud.com

Page 127 of 701

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy