Replies – Forums – Beatlefan

Forum Replies Created

Beatlefan
August 22, 2006 at 12:28 am in reply to: Premiere Pro 2 Crashes during capture

Mike,
I did get a response from Promise Inc. today and that say that this card, the Promise SATA150 TX4 Series, does not support RAID 0? Surprise to me! I set the drives up in the Computer Management console to combine the two drives. I suppose this means that they are setup with a software RAID and not a hardware RAID as I originally supposed. BUT, I did get video to capture to it with the Sony TVR 950 in Premiere! What would be the reason some video will capture to it and some not?

Michael Newman
Beatlefan
August 22, 2006 at 12:10 am in reply to: Premiere Pro 2 Crashes during capture

Yes,service pack 2 has been installed, without it PP2 would not install.
Beatlefan
August 22, 2006 at 12:08 am in reply to: Premiere Pro 2 Crashes during capture

Yes Mike,I tried capturing as HDV into a HDV, and that did not work either. After so many FREEZES the whole system continues to freeze up now reguardless of what I am doing.Do you have any advice on the AJA Xena HS PCI card on/in my system?

Thanks,

Michael Newman
Beatlefan
August 20, 2006 at 3:55 am in reply to: Premiere Pro 2 Crashes during capture

Mike V.
Thanks for your help! I have had some good fortune. My motherboard is a Supermicro P4DCE+. After several more FREEZES, I first tried capturing/saving to another drive with the TVR 950 in Premiere in DV widescreen project. That worked! The only thing I did that may have affected being able to capture is moving the four other PCI cards around into other slots in the computer when I tried installing a dedicated Firewire card in the computer. Doing that only caused the computer not to start, so I took it out and rearranged the other cards in the process. Then I captured to the RAID drives and that worked too with the TVR 950. Then I hooked up the HDR HC1 ( set to iLink conversion on for DV ) and I could not capture because the
Beatlefan
July 1, 2005 at 4:22 pm in reply to: Premiere Pro 1.5 Freezes during capture

Still Crashing! Anyone have an idea as to what is making it happen?

Thanks
Beatlefan
July 1, 2005 at 2:42 pm in reply to: Premiere Pro 1.5 Freezes during capture

I did not find any sign of video editing apps in the start up folder I updated the Firewire drivers and updated the drivers for the Soundblaster Audigy card, which has the port that I am connecting the camera to. Also, I did find that I had a 1394 port enabled for networking. So I have disabled that port in the properties page as well as unchecked the options for:
Client for MS networks
File and Print sharing
Internet Protocol TCP/IP

It still crashes!